HARTING Heavy Duty Power Connector Insert, 10A, Han A Series Female, 4 Contacts

Harting HanA Series Heavy Duty Power Connector Insert, 10A Current Rating, 400V Voltage - 09200042711

This heavy-duty power connector insert is a panel-mounted, female electrical insert designed for industrial power connections. It provides a straight-orientation, four-pole Plus earth contact arrangement for use in demanding automation, electronics and mechanical environments, with screw termination suited to standard heavy-duty housings.

Features & Benefits

• Rated for 10 A current to support moderate power circuits
  400V conductor-to-conductor rating for three-phase applications
  Silver-plated copper-alloy contacts to improve conductivity
  Conductor range 0.75–1.5 mm² for common cable sizes
  IP44 protection level to resist splash and solid ingress
  Tightening torque values specified for secure terminations

**Applications**

• Suitable for panel-mounted machinery power feeds in factories
  Ideal for control-cabinet distribution of small motors
  Used with heavy-duty housings in test and measurement rigs
  Can be used for temporary power set-ups on site equipment

What termination method is required for installation?

Screw termination is used
contact screws accept recommended drivers slotted 0.4x2.5, slotted 0.6x3.5 or PH1 for correct engagement.

How does the insert handle temperature extremes?

It is rated to operate between −40 °C and +125 °C to cope with harsh environmental ranges.

What mechanical endurance can be expected from mating cycles?

The insert endures at least 500 mating cycles, suitable for periodic disconnections.

Are there particular tightening torques for protective earth and contacts?

Contact screws should be tightened to 0.25 N·m (M3) and the PE screw to 0.8 N·m (M3.5) for correct clamping.

Notes

Two 16P + E inserts may be accommodated within a ’Size’ 32A housing (typical stock no 363-7964)

Standards

EN 60664-1
IEC 61984

Approvals

UL, CSA, SEV

Warning

These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.