Technical Documents
Specifications
Brand
Vero TechnologiesProduct Type
Extender Board
Number of Contacts
64
Board Material
Epoxy Glass Fabric Laminate
Number of Sides
2
FR Material Grade
FR4
Board Thickness
40mm
Sub Type
Eurocard Extender Board
Length
300mm
Standards/Approvals
DIN 41612
Width
233mm
Country of Origin
United Kingdom
Product Details
Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test.
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels)
Stock information temporarily unavailable.
€ 303.50
€ 303.50 Each (Exc. VAT)
1
€ 303.50
€ 303.50 Each (Exc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
Vero TechnologiesProduct Type
Extender Board
Number of Contacts
64
Board Material
Epoxy Glass Fabric Laminate
Number of Sides
2
FR Material Grade
FR4
Board Thickness
40mm
Sub Type
Eurocard Extender Board
Length
300mm
Standards/Approvals
DIN 41612
Width
233mm
Country of Origin
United Kingdom
Product Details
Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test.
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels)
