Tektronix THD Series THDP0100 Oscilloscope Probe, Differential Type, 100 MHz, BNC Connector

Tektronix Oscilloscope Probes

The Tektronix differential high voltage oscilloscope has the largest differential dynamic range capability. It allows the user to safely measure up to ±6000V. The probe supports bandwidths up to 100MHz and slew rates up to 2500V/ns at 1/1000 gain. This probe is supplied with two sizes of hook tips and has an over-range visual and audible indicator that warns the user when they are exceeding the linear range of the probe.
Note:
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The THDP0100 can measure floating voltages up to 6000V safely. An over-range visual and audible indicator warns the user when the linear range of the probe is exceeded.

Features and Benefits

• Bandwidth is DC to 200MHz ;Attenuation ratio is 1:100 and 1:1000;Rise time is 3.5ns ;Input impedance is 40Mohmll2.5pF;Maximum common mode voltage is ±6000KV ;Maximum Input voltage is 2300V CAT I 1000V CAT III ;Typical CMRR DC: >-80dB/100 kHz: >-60dB/3.2 MHz: >-30dB/100 MHz: >-26dB;Overrange Indicator;Safety Certified;Switchable attenuation;Switchable bandwidth limit;Cable length 1.5 m

Applications

• High voltage differential probes are used for measuring voltage differences between two test points where neither test point is at ground. They can be found in:
• Floating measurements
• Switching power supply design
• Motor drive design
• Electronic ballast design
• CRT display design
• Power converter design and service
• Power device evaluation
• BNC interface (P5200A probes)
• TekVPI interface (TMDP and THDP Series probes)
• TekProbe interface

Certifications

• CE certified
• ISO certified
• CAT I 2300 V
• CAT III 1000 V

Supplied with

2 probe tips
2 large hook clips
2 small hook clips
2 probe heads