Technical Documents
Specifications
Brand
SickProduct Type
Sensor Actuator Cable
Series
YG2A15
Jacket Material
Polyvinyl Chloride
Jacket Colour
Grey
Cable Length
5m
Number of Contacts A
5
Connector Type A
M12
Connector Gender A
Female
Connector Gender B
Unterminated
Connector Type B
Unterminated
Voltage
125V
Standards/Approvals
CE, UL
IP Rating
IP65, IP66K, IP67
Coding
A
Country of Origin
Germany
Product Details
This sensor actuator cable connects M12-equipped sensors to equipment via flying leads for direct wiring in industrial systems. It is intended for sensor and actuator signal transmission in harsh environments where mechanical and chemical exposure occurs, offering a robust grey PVC outer sheath and a five-core conductor arrangement for straightforward integration into automation, electrical and mechanical installations.
One end has a 5-pin A-coded M12 female connector with angled orientation and screw termination
the opposite end is unterminated flying leads for direct field wiring.
The recommended tightening torque for the locking nut is 0.6 Nm and an SW13 tool is suitable for assembly.
The cable diameter is 5.2mm and the minimum bending radius is greater than 10x diameter for flexing and greater than 5x diameter when stationary.
The connector housing is MADE from TPU, the locking nut is nickel-plated zinc die-cast and the seal uses FKM to enhance chemical resistance.
Stock information temporarily unavailable.
€ 15.31
€ 15.31 Each (Exc. VAT)
1
€ 15.31
€ 15.31 Each (Exc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
SickProduct Type
Sensor Actuator Cable
Series
YG2A15
Jacket Material
Polyvinyl Chloride
Jacket Colour
Grey
Cable Length
5m
Number of Contacts A
5
Connector Type A
M12
Connector Gender A
Female
Connector Gender B
Unterminated
Connector Type B
Unterminated
Voltage
125V
Standards/Approvals
CE, UL
IP Rating
IP65, IP66K, IP67
Coding
A
Country of Origin
Germany
Product Details
This sensor actuator cable connects M12-equipped sensors to equipment via flying leads for direct wiring in industrial systems. It is intended for sensor and actuator signal transmission in harsh environments where mechanical and chemical exposure occurs, offering a robust grey PVC outer sheath and a five-core conductor arrangement for straightforward integration into automation, electrical and mechanical installations.
One end has a 5-pin A-coded M12 female connector with angled orientation and screw termination
the opposite end is unterminated flying leads for direct field wiring.
The recommended tightening torque for the locking nut is 0.6 Nm and an SW13 tool is suitable for assembly.
The cable diameter is 5.2mm and the minimum bending radius is greater than 10x diameter for flexing and greater than 5x diameter when stationary.
The connector housing is MADE from TPU, the locking nut is nickel-plated zinc die-cast and the seal uses FKM to enhance chemical resistance.
