Technical Documents
Specifications
Brand
SickProduct Type
Sensor Actuator Cable
Cable Length
5m
Jacket Material
Polyvinyl Chloride
Jacket Colour
Grey
Number of Contacts A
4
Connector Type A
Straight M12
Connector Gender A
Female
Connector Gender B
Unterminated
Number of Contacts B
4
Connector Type B
Unterminated
Voltage
250V
Standards/Approvals
CE, UL
IP Rating
IP65, IP66K, IP67
Coding
A
Country of Origin
Germany
Product Details
This sensor to actuator cable provides a robust connection between M12‑equipped sensors and control wiring, delivering reliable signal and power transmission in industrial environments. It combines a straight female M12 connector with flying leads to facilitate flexible terminations and integration into automation systems while withstanding demanding site conditions.
When flexed in service it operates from −5 °C to +80 °C, covering most dynamic installation conditions.
The M12 female uses a screw‑lock connection tightened to 0.6 N·m with a zinc die‑cast, nickel‑plated locking nut.
The cable is unscreened, so routing away from high‑power conductors is recommended to minimise interference.
For flexible use the minimum bending radius is greater than 10x the cable diameter and for fixed runs greater than 5x the diameter.
It holds CE and UL authorisations with UL file E335179 and meets overvoltage category III with a rated impulse voltage of 2.5 kV.
Stock information temporarily unavailable.
€ 13.86
€ 13.86 Each (Exc. VAT)
1
€ 13.86
€ 13.86 Each (Exc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
SickProduct Type
Sensor Actuator Cable
Cable Length
5m
Jacket Material
Polyvinyl Chloride
Jacket Colour
Grey
Number of Contacts A
4
Connector Type A
Straight M12
Connector Gender A
Female
Connector Gender B
Unterminated
Number of Contacts B
4
Connector Type B
Unterminated
Voltage
250V
Standards/Approvals
CE, UL
IP Rating
IP65, IP66K, IP67
Coding
A
Country of Origin
Germany
Product Details
This sensor to actuator cable provides a robust connection between M12‑equipped sensors and control wiring, delivering reliable signal and power transmission in industrial environments. It combines a straight female M12 connector with flying leads to facilitate flexible terminations and integration into automation systems while withstanding demanding site conditions.
When flexed in service it operates from −5 °C to +80 °C, covering most dynamic installation conditions.
The M12 female uses a screw‑lock connection tightened to 0.6 N·m with a zinc die‑cast, nickel‑plated locking nut.
The cable is unscreened, so routing away from high‑power conductors is recommended to minimise interference.
For flexible use the minimum bending radius is greater than 10x the cable diameter and for fixed runs greater than 5x the diameter.
It holds CE and UL authorisations with UL file E335179 and meets overvoltage category III with a rated impulse voltage of 2.5 kV.
