Technical Documents
Specifications
Brand
RS ProProduct Type
Reed Relay
Contact Configuration
SPST
Mount Type
PCB
Coil Power
50mW
Coil Resistance
500Ω
Terminal Type
Through Hole
Minimum Operating Temperature
-20°C
Switching Power
15W
Operating Time
0.5ms
Maximum Operating Temperature
70°C
Height
5.1mm
Length
19.3mm
Standards/Approvals
No
Series
DIP05
Isolation Coil To Contact
1.5kV dc
Contact Resistance
200mΩ
Latching
No
Country of Origin
Germany
Product Details
RS PROs single-pole, normally open (SPNO) reed relay is useful where you might need a smaller, faster-acting relay in an electrical circuit. It has a maximum switching current of 1 A AC/DC and a coil voltage of 5 V DC.
This small reed relay features a compact design, low profile and has a mineral-filled casing and copper alloy pins. The relays DIP (dual in-line package) housing allows for use on printed circuit boards and the casing is fully sealed. It has a normally open (NO) pole and a coil suppression diode across pins two and six.
These components require lower levels of power to actuate and are frequently used in electronic circuits. RS PROs SPNO reed relay is UL (Underwriters Laboratories) approved and meets the organisation's global safety standards.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
UL
Stock information temporarily unavailable.
€ 6.10
€ 6.10 Each (Exc. VAT)
1
€ 6.10
€ 6.10 Each (Exc. VAT)
Stock information temporarily unavailable.
1
| Quantity | Unit price |
|---|---|
| 1 - 24 | € 6.10 |
| 25 - 99 | € 5.63 |
| 100 - 249 | € 5.15 |
| 250 - 499 | € 4.76 |
| 500+ | € 4.40 |
Technical Documents
Specifications
Brand
RS ProProduct Type
Reed Relay
Contact Configuration
SPST
Mount Type
PCB
Coil Power
50mW
Coil Resistance
500Ω
Terminal Type
Through Hole
Minimum Operating Temperature
-20°C
Switching Power
15W
Operating Time
0.5ms
Maximum Operating Temperature
70°C
Height
5.1mm
Length
19.3mm
Standards/Approvals
No
Series
DIP05
Isolation Coil To Contact
1.5kV dc
Contact Resistance
200mΩ
Latching
No
Country of Origin
Germany
Product Details
RS PROs single-pole, normally open (SPNO) reed relay is useful where you might need a smaller, faster-acting relay in an electrical circuit. It has a maximum switching current of 1 A AC/DC and a coil voltage of 5 V DC.
This small reed relay features a compact design, low profile and has a mineral-filled casing and copper alloy pins. The relays DIP (dual in-line package) housing allows for use on printed circuit boards and the casing is fully sealed. It has a normally open (NO) pole and a coil suppression diode across pins two and six.
These components require lower levels of power to actuate and are frequently used in electronic circuits. RS PROs SPNO reed relay is UL (Underwriters Laboratories) approved and meets the organisation's global safety standards.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
UL
