Technical Documents
Specifications
Brand
RS ProContact Configuration
SPDT
Product Type
Reed Relay
Mount Type
PCB
Coil Power
125mW
Terminal Type
Through Hole
Coil Resistance
200Ω
Minimum Operating Temperature
-20°C
Switching Power
15W
Operating Time
0.7ms
Maximum Operating Temperature
70°C
Height
5.1mm
Length
19.3mm
Standards/Approvals
No
Series
RS PRO
Isolation Coil To Contact
1.5kV dc
Latching
No
Contact Resistance
250mΩ
Country of Origin
Germany
Product Details
If you're looking for a compact, speedy relay to use in an electrical circuit, consider this RS PRO single-pole, normally open (SPNO) reed relay. The neat and low profile design features a mineral-filled casing, and the device has copper alloy pins for strength coupled with high conductivity. It has a maximum switching current of 0.25 A AC/DC and a coil voltage of 5 V DC.
You can use this relay on printed circuit boards thanks to its DIP (dual in-line package) housing and the casing is fully sealed. It features a normally open (NO) pole and a coil suppression diode across pins two and six.
Needing little power to actuate, you'll often find these types of relays used in electronic circuits. This product is UL (Underwriters Laboratories) approved and meets the organisation's international safety standards.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
UL
Stock information temporarily unavailable.
€ 14.83
€ 14.83 Each (Exc. VAT)
1
€ 14.83
€ 14.83 Each (Exc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
RS ProContact Configuration
SPDT
Product Type
Reed Relay
Mount Type
PCB
Coil Power
125mW
Terminal Type
Through Hole
Coil Resistance
200Ω
Minimum Operating Temperature
-20°C
Switching Power
15W
Operating Time
0.7ms
Maximum Operating Temperature
70°C
Height
5.1mm
Length
19.3mm
Standards/Approvals
No
Series
RS PRO
Isolation Coil To Contact
1.5kV dc
Latching
No
Contact Resistance
250mΩ
Country of Origin
Germany
Product Details
If you're looking for a compact, speedy relay to use in an electrical circuit, consider this RS PRO single-pole, normally open (SPNO) reed relay. The neat and low profile design features a mineral-filled casing, and the device has copper alloy pins for strength coupled with high conductivity. It has a maximum switching current of 0.25 A AC/DC and a coil voltage of 5 V DC.
You can use this relay on printed circuit boards thanks to its DIP (dual in-line package) housing and the casing is fully sealed. It features a normally open (NO) pole and a coil suppression diode across pins two and six.
Needing little power to actuate, you'll often find these types of relays used in electronic circuits. This product is UL (Underwriters Laboratories) approved and meets the organisation's international safety standards.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
UL
