RS PRO Oscilloscope Probe, Differential Type, 50 MHz, BNC, USB Type B, Socket Connector

RS Pro DC-50 MHz High Voltage Differential Probe RSDPB4080

RS Pro high-voltage differential probes are designed for the measurement of high-voltage differential signal, to meet the demand for floating measurement. The high bandwidth meets the demand for most measurement systems.
The probes are equipped with standard BNC input connectors. They can be used with any manufacturer oscilloscope (oscilloscope input impedance should set to 1 MΩ. When 50 Ω is selected, the attenuation multiply attenuates doubles) to test waveform of the tested circuits. There is an automatic save function, to prevent users reoperating in case of power supply drops. The probes have good capability of common mode noise suppression and can be widely used in the research and development, debugging or overhauling work for switching power supply, frequency converter, electronic ballast, frequency conversion electronic appliances and other electric power equipment.

Features and Benefits

• Bandwidth DC-50 MHz
• Rise time ≤7 ns
• DC accuracy ±1%
• Attenuation ratio 50 X/500 X
• Maximum differential test voltage (DC + Peak AC) 10 X: 80 V, 100 X: 800 V
• Maximum input common mode voltage (voltage-to-earth Vrms) 800 Vrms
• Input impedance single-ended to ground 27 MΩ, two inputs 54 MΩ
• Input capacitance single-ended to ground <2.3 pF, two inputs <1.2 pF
• CMRR: DC >80 dB; 100 kHz >60 dB; 1 MHz >50 dB
• Propagation delay 18 ns ± 1 ns
• Power supply 9 V DC power
• Probe body dimensions 165 x 69 x 26 mm
• Probe body weight approximately 500 g

Applications include:

• Floating voltage measurement
• Frequency converter
• Welding, plating power supplies
• Induction heating, electomagnetic oven