Technical Documents
Specifications
Brand
NorgrenProduct Type
Pneumatic Fitting
Series
Pneufit C
Tube Connection Type
Push-in
Tube Connection Size
16.12mm
Material
Polybutylene
Maximum Operating Temperature
60°C
Standards/Approvals
No
Finish
Nickel Plated
Country of Origin
Korea, Republic Of
Product Details
Building your air-powered system is a breeze with this pneumatic fitting from IMI Norgren. The straight connector has a 16mm push-in connector on one end and a 12mm push-in connector on the other, so you can conveniently join up tubes of different sizes. It's a versatile option that's suitable for connecting commonly used PA and PUR tubing. The fitting handles pressures of up to 10 bar, meaning it's sturdy enough to handle a high-pressure setup.
To connect this pneumatic fitting, neatly cut the end of the tube and make sure it's free from burrs. Push the tube into the fitting until you hit the tube stop, then pull it back – you'll feel the grab ring has taken hold. To disconnect the fitting, simply push the tube into it, hold down the retaining collet then withdraw the tube.
Stock information temporarily unavailable.
$ 109.69
$ 109.69 1 Bag of 10 (Exc. VAT)
1
$ 109.69
$ 109.69 1 Bag of 10 (Exc. VAT)
Stock information temporarily unavailable.
1
| Quantity | Unit price |
|---|---|
| 1 - 4 | $ 109.69 |
| 5 - 9 | $ 107.56 |
| 10+ | $ 105.18 |
Technical Documents
Specifications
Brand
NorgrenProduct Type
Pneumatic Fitting
Series
Pneufit C
Tube Connection Type
Push-in
Tube Connection Size
16.12mm
Material
Polybutylene
Maximum Operating Temperature
60°C
Standards/Approvals
No
Finish
Nickel Plated
Country of Origin
Korea, Republic Of
Product Details
Building your air-powered system is a breeze with this pneumatic fitting from IMI Norgren. The straight connector has a 16mm push-in connector on one end and a 12mm push-in connector on the other, so you can conveniently join up tubes of different sizes. It's a versatile option that's suitable for connecting commonly used PA and PUR tubing. The fitting handles pressures of up to 10 bar, meaning it's sturdy enough to handle a high-pressure setup.
To connect this pneumatic fitting, neatly cut the end of the tube and make sure it's free from burrs. Push the tube into the fitting until you hit the tube stop, then pull it back – you'll feel the grab ring has taken hold. To disconnect the fitting, simply push the tube into it, hold down the retaining collet then withdraw the tube.
