Technical Documents
Specifications
Brand
Delta-MobreyDevice Type
Solids Level Switch
Product Type
Level Switch
Mount Type
Vertical, Horizontal
Housing Material
Aluminium Alloy
Cable Length
235mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
110°C
Maximum AC Voltage
265V ac
Maximum DC Voltage
55V dc
Maximum Current
8A
Maximum Pressure
10bar
Gasket Material
Non-Asbestos Sheet
Standards/Approvals
No
Hazardous Area Certification
ATEX
Series
VLS
Product Details
The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.
Supplied with:
User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.
How do you carry out an installation?
Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.
Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.
WARNING!
Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.
A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.
Stock information temporarily unavailable.
€ 800.72
€ 800.72 Each (Exc. VAT)
1
€ 800.72
€ 800.72 Each (Exc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
Delta-MobreyDevice Type
Solids Level Switch
Product Type
Level Switch
Mount Type
Vertical, Horizontal
Housing Material
Aluminium Alloy
Cable Length
235mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
110°C
Maximum AC Voltage
265V ac
Maximum DC Voltage
55V dc
Maximum Current
8A
Maximum Pressure
10bar
Gasket Material
Non-Asbestos Sheet
Standards/Approvals
No
Hazardous Area Certification
ATEX
Series
VLS
Product Details
The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.
Supplied with:
User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.
How do you carry out an installation?
Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.
Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.
WARNING!
Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.
A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.
