ESD continuous monitors, or constant monitors, continuously check for electrostatic discharge (ESD) on work surfaces. This is important for preventing damage to sensitive electronic equipment or to monitor discharge in areas where there is a danger of igniting flammable liquids or gases. Other grounding components such as wrist straps, ESD safe matsand ESD grounding cordscan be attached to the monitors, connecting work surfaces and operators.
LEDs (light emitting diodes) indicate different colours to alert users if there is a discharge, sometimes accompanied by an audible alarm.
ESD continuous monitors save set-up time, ensuring integrity of the entire ground loop, meaning wrist straps and other ESD accessories dont need to be checked individually at the start of a shift.
Some monitors not only detect static electricity, but also actively eliminate it by balancing ions. This type of continuous monitor is called an ioniser, ionising bar or static bar.
Monitors can be connected to one or two wrist straps and one or two work surfaces, plus grounding. Terminal types and supply voltages vary. Some products include EOS (electrical overstress) detection and/or charge detection.
(Price shown excludes VAT)
|Part Details||Brand||Terminal Type||Supply Voltage||Height||Number of Operators||Length||Number of Worksurfaces||Width||Supervisor Monitoring||Parking Station||Charge Detection||EOS Detection|
AC adaptor, monitor, IEC input, 220V
||Desco EMIT||-||220V ac||-||-||-||-||-||-||-||-||-|
ESD Continuous Monitor 100 → 120V ac
||SCS||Snap||100 → 120V ac||35 mm||1||165mm||1||79mm||No||No||No||No|
ESD Continuous Monitor 100 → 240V ac
||SCS||Jack||100 → 240V ac||22 mm||1||66mm||1||61mm||No||No||Yes||Yes|
ESD Continuous Monitor 220V ac
||RS Pro||Banana||220V ac||51 mm||-||51mm||-||76mm||-||-||-||-|
Electrostatic Sensor, IZS31,+/- 20kV
||SMC||Crimp||24V dc||13 mm||-||87.5mm||-||16.6mm||-||-||-||-|
Dual operator continuous monitor, 220V
ESD Continuous Monitor 100 → 240V ac/dc
||Desco||-||100 → 240V ac/dc||23 mm||1||98mm||1||53mm||-||Yes||-||-|
ESD Continuous Monitor 24 V dc, 100 → 240 V ac
||Desco||10 mm Jack, 10 mm Snap, Snap||24 V dc, 100 → 240 V ac||23 mm||1||70mm||1||53mm||-||-||-||Yes|
ESD Continuous Monitor 5V dc
||RS Pro||Banana||5V dc||30 mm||1||61mm||1||69mm||Yes||No||No||Yes|
Zero volt continuous monitor, dual wire
||Desco EMIT||10 mm Snap, Phone, Push In, Screw||100 → 240V ac||66 mm||2||142mm||2||119mm||Yes||Yes||No||No|