Round Leaded Gunmetal Metal Tube, 1 1/2in OD, 3/4in ID, 13in L, 1.5in W, 3/4in Thickness
Technical Document
Specifications
Brand
RS ProMaterial
Leaded Gunmetal
Tube Form
Round
Length
13in
Width
1.5in
Inner Diameter
3/4in
Thickness
3/4in
Outer Diameter
1 1/2in
Thermal Conductivity
33.6Btu
Hardness
65 HB
Suitability
Bearings, Bushings, Gears, Piston Rings, Pumps
Density
0.322lb/in³
Tensile Strength
241 Mpa
Product details
Leaded Gunmetal, (Cast Lead Bronze)
A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths
Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)
Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.
Stock information temporarily unavailable.
Please check again later.
€ 276.59
Each (Exc. VAT)
1
€ 276.59
Each (Exc. VAT)
1
Buy in bulk
| Quantity | Unit price |
|---|---|
| 1 - 2 | € 276.59 |
| 3 - 5 | € 257.23 |
| 6 - 11 | € 243.40 |
| 12+ | € 221.27 |
Technical Document
Specifications
Brand
RS ProMaterial
Leaded Gunmetal
Tube Form
Round
Length
13in
Width
1.5in
Inner Diameter
3/4in
Thickness
3/4in
Outer Diameter
1 1/2in
Thermal Conductivity
33.6Btu
Hardness
65 HB
Suitability
Bearings, Bushings, Gears, Piston Rings, Pumps
Density
0.322lb/in³
Tensile Strength
241 Mpa
Product details
Leaded Gunmetal, (Cast Lead Bronze)
A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths
Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)
Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.