Takachi Electric Industrial Metal Mounting Plate, 1.5mm H, 136.5mm W, 255.6mm L for Use with AWN Case
Technical Document
Specifications
Product Type
Mounting Plate
Width
136.5mm
Height
1.5mm
Length
255.6mm
Material
Metal
For Use With
AWN Case
Country of Origin
Japan
Product details
Takachi AWN Heatsink Aluminium Enclosure
The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples include LED outdoor power supply case, enclosed switch, controller or industrial camera housing.
Heavy duty enclosure
Silver or black anodized extruded aluminium body with heat-sink
Flanged metallic grey or black powder coated side plates for easy wall mounting
PCB or chassis are horizontally mountable by sliding into grooved inner body frame
Integral card guides accept 1.6mm PCB
IP67 rated
Operating temperature -40 to +105°C
Maximum torque 1.0N/m (10kgf/cm)
Supplied with
2 x side plates, 1 x body frame, 2 x silicone gaskets, 8 x stainless steel screws and 4 x rubber feet.
Stock information temporarily unavailable.
Please check again later.
€ 22.06
Each (Exc. Vat)
1
€ 22.06
Each (Exc. Vat)
1
Buy in bulk
| Quantity | Unit price |
|---|---|
| 1 - 5 | € 22.06 |
| 6 - 9 | € 21.01 |
| 10+ | € 20.55 |
Technical Document
Specifications
Product Type
Mounting Plate
Width
136.5mm
Height
1.5mm
Length
255.6mm
Material
Metal
For Use With
AWN Case
Country of Origin
Japan
Product details
Takachi AWN Heatsink Aluminium Enclosure
The Takachi AWN series is a heavy duty waterproof enclosure ideally suited to tough outdoor environments. These enclosures have diecast side plates and an extruded aluminium body with fins on either side which act as a heat sink. Application examples include LED outdoor power supply case, enclosed switch, controller or industrial camera housing.
Heavy duty enclosure
Silver or black anodized extruded aluminium body with heat-sink
Flanged metallic grey or black powder coated side plates for easy wall mounting
PCB or chassis are horizontally mountable by sliding into grooved inner body frame
Integral card guides accept 1.6mm PCB
IP67 rated
Operating temperature -40 to +105°C
Maximum torque 1.0N/m (10kgf/cm)
Supplied with
2 x side plates, 1 x body frame, 2 x silicone gaskets, 8 x stainless steel screws and 4 x rubber feet.