SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

RS Stock No.: 131-1336Brand: SEGGERManufacturers Part No.: 8.07.01 SWD Isolator
brand-logo
View all in Development Tool Accessories

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Stock information temporarily unavailable.

€ 255.48

€ 255.48 Each (Exc. VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

1

Available in multiples of 1
1€ 255.48
2€ 485.43
3€ 728.14
4€ 970.86
5€ 1,213.57
6€ 1,456.28
7€ 1,699.00
8€ 1,941.71
9€ 2,184.42
10€ 2,427.14
11€ 2,669.85
12€ 2,912.57
13€ 3,155.28
14€ 3,397.99
15€ 3,640.71

€ 255.48

€ 255.48 Each (Exc. VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
Stock information temporarily unavailable.

1

Available in multiples of 1
1€ 255.48
2€ 485.43
3€ 728.14
4€ 970.86
5€ 1,213.57
6€ 1,456.28
7€ 1,699.00
8€ 1,941.71
9€ 2,184.42
10€ 2,427.14
11€ 2,669.85
12€ 2,912.57
13€ 3,155.28
14€ 3,397.99
15€ 3,640.71

Stock information temporarily unavailable.

Please check again later.

QuantityUnit price
1 - 1€ 255.48
2+€ 242.71

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET