RS PRO 115 V ac, 230 V ac, 2 x 25V ac Toroidal Transformer, 30VA 2 Output
Technical Document
Specifications
Brand
RS ProPrimary Voltage Rating
115 V ac, 230 V ac
Secondary Voltage Rating
2 x 25V ac
Power Rating
30VA
Number of Outputs
2
Secondary Current
600mA
Height
32mm
Weight
500g
Diameter
71mm
Dimensions
71 (Dia.) x 32mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Fixing Hole Diameter
5mm
Country of Origin
Poland
Product details
Open Form Toroidal Transformers, 115-230Vac Primary, 30VA & 50VA
Small size and low weight compared with traditional stacked laminated transformers
Both primary and secondary windings may be connected in series or parallel
Low induced noise (hum)
Low level of radiated magnetic field
Flexible leadouts, for ease of installation
100% electrical and flash testing
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
CE marked, UL506, UL1411 and UL478
Standards
EN61558, IEC742
Stock information temporarily unavailable.
Please check again later.
€ 25.09
Each (Exc. VAT)
1
€ 25.09
Each (Exc. VAT)
1
Technical Document
Specifications
Brand
RS ProPrimary Voltage Rating
115 V ac, 230 V ac
Secondary Voltage Rating
2 x 25V ac
Power Rating
30VA
Number of Outputs
2
Secondary Current
600mA
Height
32mm
Weight
500g
Diameter
71mm
Dimensions
71 (Dia.) x 32mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Fixing Hole Diameter
5mm
Country of Origin
Poland
Product details
Open Form Toroidal Transformers, 115-230Vac Primary, 30VA & 50VA
Small size and low weight compared with traditional stacked laminated transformers
Both primary and secondary windings may be connected in series or parallel
Low induced noise (hum)
Low level of radiated magnetic field
Flexible leadouts, for ease of installation
100% electrical and flash testing
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
CE marked, UL506, UL1411 and UL478
Standards
EN61558, IEC742