Philips 9904 Reversible Synchronous AC Motor, 1.7 W, 2 Phase, 24 Pole, 110 → 240 V
Technical Document
Specifications
Brand
PhilipsPower Rating
1.7 W
AC Motor Type
Synchronous
Supply Voltage
110 → 240 V
Phase
2
Output Speed
300 rpm @ 110 V
Number of Poles
24
Shaft Diameter
2mm
Shaft Length
7.8mm
Rotation
Reversible
Current Rating
8 mA
Length
21mm
Maximum Output Torque
7 mNm
Dimensions
35 (Dia.) x 21 mm
Series
9904
Product details
Dual Voltage, Reversible
Consisting of two separate phases wound on 12 pole pairs, which when connected in either series or parallel will allow the motor to be run from 240Vac or 110Vac respectively. The motor is provided with two phasing capacitors which, depending on connections, will either forward or reverse the motor direction
Supply voltage tolerance ±10%. Input power at 240 V, 1.7 W, 110 V, 0.8 W. Working torque at 240 V, 7 mNm, 110 V, 4 mNm
AC Synchronous Motors
These synchronous motors are for direct driving from an a.c. supply. Ideally suited for time driving in instrumentation, machine and process control. The smaller units can be directly connected to the synchronous gearboxes (typical stock no. 332-868 etc).
Stock information temporarily unavailable.
Please check again later.
€ 65.30
Each (Exc. VAT)
1
€ 65.30
Each (Exc. VAT)
1
Technical Document
Specifications
Brand
PhilipsPower Rating
1.7 W
AC Motor Type
Synchronous
Supply Voltage
110 → 240 V
Phase
2
Output Speed
300 rpm @ 110 V
Number of Poles
24
Shaft Diameter
2mm
Shaft Length
7.8mm
Rotation
Reversible
Current Rating
8 mA
Length
21mm
Maximum Output Torque
7 mNm
Dimensions
35 (Dia.) x 21 mm
Series
9904
Product details
Dual Voltage, Reversible
Consisting of two separate phases wound on 12 pole pairs, which when connected in either series or parallel will allow the motor to be run from 240Vac or 110Vac respectively. The motor is provided with two phasing capacitors which, depending on connections, will either forward or reverse the motor direction
Supply voltage tolerance ±10%. Input power at 240 V, 1.7 W, 110 V, 0.8 W. Working torque at 240 V, 7 mNm, 110 V, 4 mNm
AC Synchronous Motors
These synchronous motors are for direct driving from an a.c. supply. Ideally suited for time driving in instrumentation, machine and process control. The smaller units can be directly connected to the synchronous gearboxes (typical stock no. 332-868 etc).