NCS5651MNTXG onsemi, Op Amp, 80MHz, 6 → 12 V, 20-Pin QFN
Technical Document
Specifications
Brand
onsemiMounting Type
Surface Mount
Package Type
QFN
Power Supply Type
Single
Number of Channels per Chip
2
Pin Count
20
Typical Single Supply Voltage
6 → 12 V
Typical Gain Bandwidth Product
80MHz
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Rail to Rail
No
Height
0.95mm
Width
4mm
Dimensions
4 x 4 x 0.95mm
Length
4mm
Product details
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required
Features
Rail-to-Rail: drop of only +/-1 V with Lout = 1.5A
Flexible 4th-Order Filtering
Current-Limit Set with One Resistor
Diagnostic Flags Level Shifted to VCC to Simplify Interface with External MCU
Thermal Warning Flag with Flexible Threshold Setting
Thermal Error flag and Shutdown - Overcurrent Flag
Enable/Shutdown Control
Exposed Thermal Pad
Operational Amplifiers, ON Semiconductor
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stock information temporarily unavailable.
Please check again later.
€ 2.367
Each (Supplied on a Reel) (Exc. VAT)
Production pack (Reel)
20
€ 2.367
Each (Supplied on a Reel) (Exc. VAT)
Production pack (Reel)
20
Buy in bulk
| Quantity | Unit price | Per Reel |
|---|---|---|
| 20 - 198 | € 2.367 | € 4.73 |
| 200 - 998 | € 2.051 | € 4.10 |
| 1000+ | € 1.80 | € 3.60 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Technical Document
Specifications
Brand
onsemiMounting Type
Surface Mount
Package Type
QFN
Power Supply Type
Single
Number of Channels per Chip
2
Pin Count
20
Typical Single Supply Voltage
6 → 12 V
Typical Gain Bandwidth Product
80MHz
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Rail to Rail
No
Height
0.95mm
Width
4mm
Dimensions
4 x 4 x 0.95mm
Length
4mm
Product details
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required
Features
Rail-to-Rail: drop of only +/-1 V with Lout = 1.5A
Flexible 4th-Order Filtering
Current-Limit Set with One Resistor
Diagnostic Flags Level Shifted to VCC to Simplify Interface with External MCU
Thermal Warning Flag with Flexible Threshold Setting
Thermal Error flag and Shutdown - Overcurrent Flag
Enable/Shutdown Control
Exposed Thermal Pad
Operational Amplifiers, ON Semiconductor
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products