Technical Document
Specifications
Brand
FlukeMeasurement Parameters
Acceleration, Displacement, Velocity
Maximum Acceleration
100g
Minimum Acceleration
0.01g
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-20°C
Battery Type
AA
Model Number p
805
Model Number (p)
805
Country of Origin
United States
Product details
Fluke Connect 805 Vibration Meter
Fluke 805 vibration meter measures overall machine vibrations, bearing vibrations and temperature simultaneously. In order to ensure measurement repeatability, the device makes use of an innovative sensor that checks the force applied to the tip before the vibration measurement starts.
The overall vibrations levels are compared to pre programmed alarm levels and machine condition is provided in four stages.
Bearing condition is assessed automatically with crest factor plus parameter. With the use of this parameter it is not needed to know the shaft diameter and rotational speed of the bearing, neither the bearing class.
Temperature measurements are conducted touchless with an infrared sensor.
All measured values can be stored and exported to an MS Excel template to create trend plots that help to predict the machine- and bearing condition
The unit has an audio out for listening to machine noise and a LED light torch to make dark measurement spots visible.
Sensor tip design minimises measurement variations
Low & high frequency ranges
USB connection enables data export to Excel
Trending in Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz)
Colored lighting system indicates pressure needed to be take measurements
Memory: Up to 3500 measurements
Operating temperature: -20 → 50°C
What makes the Fluke 805 the most reliable vibration screening device available?
Innovative sensor and sensor tip design helps minimize measurement variations caused by device angle or contact pressure
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of
measurement for a wide variety of machines
Crest Factor+ feature provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Features
Innovative sensor
Red-Green LED feedback
Crest Factor plus (CF+)
Overall vibration assessment
Trending in 805 XL template
Overall vibrations, CF+ and temp
LED torch
Audio output
Benefits
Ensures measurement repeatability
Clear visual distant feedback on measurement process, without looking at the display
Assessment of bearing condition without entering any bearing dimension nor rotational speed.
Empirical machine vibration alarm levels are programmed in 805 and help to judge the machine condition.
Straight forward excel template that creates automatically a trend plot on each vibration parameter measured. Easy to use and no installation hassles.
Measured simultaneously which saves you time
Even when environment gets dark, the onboard LED illuminates the point of measurement
Listen to machine noise
Fluke CONNECT™
Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field.
The Fluke Connect mobile app is available for Android™ (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products, the largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more.
Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place.
(Not compatible with Fluke CNX test tools)
Supplied with
USB cable, storage case, belt holster, quick reference guide & 2 x AA batteries.
Stock information temporarily unavailable.
Please check again later.
€ 2,727.40
Each (Exc. VAT)
1
€ 2,727.40
Each (Exc. VAT)
1
Technical Document
Specifications
Brand
FlukeMeasurement Parameters
Acceleration, Displacement, Velocity
Maximum Acceleration
100g
Minimum Acceleration
0.01g
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-20°C
Battery Type
AA
Model Number p
805
Model Number (p)
805
Country of Origin
United States
Product details
Fluke Connect 805 Vibration Meter
Fluke 805 vibration meter measures overall machine vibrations, bearing vibrations and temperature simultaneously. In order to ensure measurement repeatability, the device makes use of an innovative sensor that checks the force applied to the tip before the vibration measurement starts.
The overall vibrations levels are compared to pre programmed alarm levels and machine condition is provided in four stages.
Bearing condition is assessed automatically with crest factor plus parameter. With the use of this parameter it is not needed to know the shaft diameter and rotational speed of the bearing, neither the bearing class.
Temperature measurements are conducted touchless with an infrared sensor.
All measured values can be stored and exported to an MS Excel template to create trend plots that help to predict the machine- and bearing condition
The unit has an audio out for listening to machine noise and a LED light torch to make dark measurement spots visible.
Sensor tip design minimises measurement variations
Low & high frequency ranges
USB connection enables data export to Excel
Trending in Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz)
Colored lighting system indicates pressure needed to be take measurements
Memory: Up to 3500 measurements
Operating temperature: -20 → 50°C
What makes the Fluke 805 the most reliable vibration screening device available?
Innovative sensor and sensor tip design helps minimize measurement variations caused by device angle or contact pressure
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of
measurement for a wide variety of machines
Crest Factor+ feature provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Features
Innovative sensor
Red-Green LED feedback
Crest Factor plus (CF+)
Overall vibration assessment
Trending in 805 XL template
Overall vibrations, CF+ and temp
LED torch
Audio output
Benefits
Ensures measurement repeatability
Clear visual distant feedback on measurement process, without looking at the display
Assessment of bearing condition without entering any bearing dimension nor rotational speed.
Empirical machine vibration alarm levels are programmed in 805 and help to judge the machine condition.
Straight forward excel template that creates automatically a trend plot on each vibration parameter measured. Easy to use and no installation hassles.
Measured simultaneously which saves you time
Even when environment gets dark, the onboard LED illuminates the point of measurement
Listen to machine noise
Fluke CONNECT™
Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field.
The Fluke Connect mobile app is available for Android™ (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products, the largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more.
Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place.
(Not compatible with Fluke CNX test tools)
Supplied with
USB cable, storage case, belt holster, quick reference guide & 2 x AA batteries.