Fluke Networks FTK1475 Single Mode & Multimode Fibre Optic Test Kit
Technical Document
Specifications
Brand
Fluke NetworksCable Type
Single Mode & Multimode
Equipment Type
Fibre Optic Test Kit
Connector Type
FC Port, LC Connector, LC Port, SC, ST
Wavelengths
850 nm, 1300 nm, 1310 nm, 1550nm
Resolution
0.01 dB
Interface Type
USB
Maximum Power Measurement
10dBm
Magnification
200
Battery Type
NiMH
Battery Life
2 h
Power Source
Battery, Mains
Includes
AC Adapter/Battery Charger, FC Port, Fiber Probe and Display, LC Port, Probe Adapter Tips (1.5 mm Tip Set), Probe Adapter Tips (SC and Universal 2.5 mm Patch Cord Tip), Probe Adapter Tips (ST), Soft Carrying Case
Width
44mm
Length
72mm
Dimensions
6.4 x 3.2 x 1.5in
Minimum Operating Temperature
0°C
Height
140mm
Model Number p
FTK1475
Weight
230g
Plug Type
Type B - North American 3-pin
Minimum Output Power
-20dBm
Maximum Operating Temperature
+40°C
Country of Origin
United States
Product details
Complete Fiber Verification Kit with FI-500 FiberInspector Micro
The FKT1475 is a Complete SimpliFiber Pro Verification Kit designed for contractors and network technicians who install and maintain premises networks with both multimode and single mode optical fiber. This complete kit lets you verify optical loss and power levels at 850 nm, 1300 nm, 1310 nm and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. This kit includes the FI-500 FiberInspector Micro.
Features and Benefits FI-500
PortBright™ a built-in flashlight illuminates dark areas and dense panels
AutoFocus for stable images in few seconds
Large display to view single-mode and multimode fiber endfaces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm)
APC tips available
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Applications
SimpliFiber Pro Optical Power Meter and Fiber Test Kits have all the devices to successfully verify and troubleshoot optical fiber cabling systems, measure loss and power levels, and inspect and clean connector end-faces.
Supplied with
FI-500 with SimpliFiber Pro Multimode & Singlemode PMLS, VisiFault, 2 FindFibers, Cleaning kit (NFC-KIT-BOX) and 1.25 mm Swabs
Stock information temporarily unavailable.
Please check again later.
€ 11,190.97
€ 11,190.97 Each (Exc. VAT)
1
€ 11,190.97
€ 11,190.97 Each (Exc. VAT)
1
Technical Document
Specifications
Brand
Fluke NetworksCable Type
Single Mode & Multimode
Equipment Type
Fibre Optic Test Kit
Connector Type
FC Port, LC Connector, LC Port, SC, ST
Wavelengths
850 nm, 1300 nm, 1310 nm, 1550nm
Resolution
0.01 dB
Interface Type
USB
Maximum Power Measurement
10dBm
Magnification
200
Battery Type
NiMH
Battery Life
2 h
Power Source
Battery, Mains
Includes
AC Adapter/Battery Charger, FC Port, Fiber Probe and Display, LC Port, Probe Adapter Tips (1.5 mm Tip Set), Probe Adapter Tips (SC and Universal 2.5 mm Patch Cord Tip), Probe Adapter Tips (ST), Soft Carrying Case
Width
44mm
Length
72mm
Dimensions
6.4 x 3.2 x 1.5in
Minimum Operating Temperature
0°C
Height
140mm
Model Number p
FTK1475
Weight
230g
Plug Type
Type B - North American 3-pin
Minimum Output Power
-20dBm
Maximum Operating Temperature
+40°C
Country of Origin
United States
Product details
Complete Fiber Verification Kit with FI-500 FiberInspector Micro
The FKT1475 is a Complete SimpliFiber Pro Verification Kit designed for contractors and network technicians who install and maintain premises networks with both multimode and single mode optical fiber. This complete kit lets you verify optical loss and power levels at 850 nm, 1300 nm, 1310 nm and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. This kit includes the FI-500 FiberInspector Micro.
Features and Benefits FI-500
PortBright™ a built-in flashlight illuminates dark areas and dense panels
AutoFocus for stable images in few seconds
Large display to view single-mode and multimode fiber endfaces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm)
APC tips available
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Applications
SimpliFiber Pro Optical Power Meter and Fiber Test Kits have all the devices to successfully verify and troubleshoot optical fiber cabling systems, measure loss and power levels, and inspect and clean connector end-faces.
Supplied with
FI-500 with SimpliFiber Pro Multimode & Singlemode PMLS, VisiFault, 2 FindFibers, Cleaning kit (NFC-KIT-BOX) and 1.25 mm Swabs