Eaton Fuse Switch Disconnector, 3 + N Pole, 20A Max Current, 20A Fuse Current

RS Stock No.: 204-1585Brand: EatonManufacturers Part No.: 197421 T0-2-8900/SE1/SVB
brand-logo
View all in Fuse Switch Disconnectors

Technical Document

Specifications

Brand

Eaton

Number of Poles

3 + N

Maximum Current

20A

Fuse Current Rating

20A

Enclosed/Not Enclosed

Enclosed

Mounting Type

Surface Mount

Normal State Configuration

4NO

Range

Main Switch, Maintenance Switch, Switch Disconnector

Series

EATON MOELLER

Auxiliary Contacts Available

Yes

Terminal Type

Screw

Maximum Operating Temperature

+40°C

Minimum Operating Temperature

-25°C

Voltage Rating

690V ac

Product details

Eaton Non-Fused Switch Disconnectors - T0 Series Rotary Switches

The T0 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 20 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

• Performs local isolation, manual override & safety switch functions
• T0 Series fit a standard front plate of 45 x 45 mm
• For spare rotary thumb stick (black) see stock no. 176-9759
• For Shaft Extension Kit see stock no. 323-173

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 186.15

Each (Exc. Vat)

Eaton Fuse Switch Disconnector, 3 + N Pole, 20A Max Current, 20A Fuse Current

€ 186.15

Each (Exc. Vat)

Eaton Fuse Switch Disconnector, 3 + N Pole, 20A Max Current, 20A Fuse Current
Stock information temporarily unavailable.

Technical Document

Specifications

Brand

Eaton

Number of Poles

3 + N

Maximum Current

20A

Fuse Current Rating

20A

Enclosed/Not Enclosed

Enclosed

Mounting Type

Surface Mount

Normal State Configuration

4NO

Range

Main Switch, Maintenance Switch, Switch Disconnector

Series

EATON MOELLER

Auxiliary Contacts Available

Yes

Terminal Type

Screw

Maximum Operating Temperature

+40°C

Minimum Operating Temperature

-25°C

Voltage Rating

690V ac

Product details

Eaton Non-Fused Switch Disconnectors - T0 Series Rotary Switches

The T0 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 20 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

• Performs local isolation, manual override & safety switch functions
• T0 Series fit a standard front plate of 45 x 45 mm
• For spare rotary thumb stick (black) see stock no. 176-9759
• For Shaft Extension Kit see stock no. 323-173

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.