Unidad supresora de transitorios Cooper Bussmann, 3 Polos, 750 Vac, Carril DIN

Código de producto RS: 756-4514Marca: Cooper BussmannNúmero de parte de fabricante: BPM750WE
brand-logo

Documentos Técnicos

Especificaciones

Tipo de Supresor

3 Pole Arrester

Máxima Tensión Nominal

750 Vac

Tipo de montaje

DIN Rail

Series

BPM

Longitud

90mm

Profundidad

54mm

Altura

43.5mm

Dimensiones del Cuerpo

90 x 54 x 43.5mm

Mínima Temperatura de Funcionamiento

-40°C

Temperatura Máxima de Operación

+80°C

País de Origen

Germany

Datos del producto

Cooper Bussmann SPD Solutions - Wind

The Cooper Bussman Wind SPD solution consists of a base and locking module that features a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant Y circuit prevents damage to the surge protective devices. The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication, the remote signalling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed.

Diseño de carril DIN modular con codificación y rechazo de colores para facilitar la identificación, instalación y mantenimiento
La protección de sobrecorriente integrada elimina la necesidad de cualquier instalación de fusibles o cableado adicionales
La Indicación easyID™ Visual y la señalización opcional de contactos remota facilitan el control del estado
La tecnología de interrupción de cortocircuitos (SCI) de acción rápida responde eficientemente a condiciones de sobretensión

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Información de stock no disponible temporalmente.

Vuelva a verificar más tarde.

Información de stock no disponible temporalmente.

Price on asking

Unidad supresora de transitorios Cooper Bussmann, 3 Polos, 750 Vac, Carril DIN

Price on asking

Unidad supresora de transitorios Cooper Bussmann, 3 Polos, 750 Vac, Carril DIN
Información de stock no disponible temporalmente.

Documentos Técnicos

Especificaciones

Tipo de Supresor

3 Pole Arrester

Máxima Tensión Nominal

750 Vac

Tipo de montaje

DIN Rail

Series

BPM

Longitud

90mm

Profundidad

54mm

Altura

43.5mm

Dimensiones del Cuerpo

90 x 54 x 43.5mm

Mínima Temperatura de Funcionamiento

-40°C

Temperatura Máxima de Operación

+80°C

País de Origen

Germany

Datos del producto

Cooper Bussmann SPD Solutions - Wind

The Cooper Bussman Wind SPD solution consists of a base and locking module that features a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant Y circuit prevents damage to the surge protective devices. The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication, the remote signalling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed.

Diseño de carril DIN modular con codificación y rechazo de colores para facilitar la identificación, instalación y mantenimiento
La protección de sobrecorriente integrada elimina la necesidad de cualquier instalación de fusibles o cableado adicionales
La Indicación easyID™ Visual y la señalización opcional de contactos remota facilitan el control del estado
La tecnología de interrupción de cortocircuitos (SCI) de acción rápida responde eficientemente a condiciones de sobretensión

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.