Technical Document
Specifications
Brand
BoplaPanel Type
Front Panel
Width
56.3mm
Height
2mm
Length
282mm
Material
Aluminium
Colour
Natural
Colour
Natural
For Use With
Ultramas Enclosures
Country of Origin
Germany
Product details
ABS Eurocard compatible case, Ultramas19 Series
Four Eurocard compatible cases made of light grey ABS plastic, 3 HU or 6 HU high, with or without ventilation. The cases can be set up to be free-standing or stacked (front and back panels must be ordered separately). All cases have a width of 9 sub-units (1 sub-unit = 5.08 mm) and accept 160 mm PCB Eurocards with 3 HU or 6 HU. The depth is always 199 mm (exterior dimensions).
Eight screw hole covers are also supplied, and can be fitted on top or on the side to keep the case horizontal and vertical or to allow it to be stacked. Feet/tilt feet for vertical or horizontal set-up are supplied. The 2 mm thick anodised aluminium front and back panels can be slotted into the case and contribute to the overall clean image.
The width of the case can be increased by 9 sub-units using the extension set.
The case can be mounted on a wall using the wall brackets. The case's clearance from the floor can be increased to improve ventilation using the foot kit.
Stock information temporarily unavailable.
Please check again later.
€ 9.54
Each (Exc. Vat)
1
€ 9.54
Each (Exc. Vat)
1
Buy in bulk
Quantity | Unit price |
---|---|
1 - 9 | € 9.54 |
10 - 14 | € 9.15 |
15+ | € 8.75 |
Technical Document
Specifications
Brand
BoplaPanel Type
Front Panel
Width
56.3mm
Height
2mm
Length
282mm
Material
Aluminium
Colour
Natural
Colour
Natural
For Use With
Ultramas Enclosures
Country of Origin
Germany
Product details
ABS Eurocard compatible case, Ultramas19 Series
Four Eurocard compatible cases made of light grey ABS plastic, 3 HU or 6 HU high, with or without ventilation. The cases can be set up to be free-standing or stacked (front and back panels must be ordered separately). All cases have a width of 9 sub-units (1 sub-unit = 5.08 mm) and accept 160 mm PCB Eurocards with 3 HU or 6 HU. The depth is always 199 mm (exterior dimensions).
Eight screw hole covers are also supplied, and can be fitted on top or on the side to keep the case horizontal and vertical or to allow it to be stacked. Feet/tilt feet for vertical or horizontal set-up are supplied. The 2 mm thick anodised aluminium front and back panels can be slotted into the case and contribute to the overall clean image.
The width of the case can be increased by 9 sub-units using the extension set.
The case can be mounted on a wall using the wall brackets. The case's clearance from the floor can be increased to improve ventilation using the foot kit.