Reliance Water Controls Stainless Steel Stopcock, 1/2in
Technical Document
Specifications
Connection 1
1/2 in BSP Male
Body Material
Stainless Steel
For Use With
Cold Water, Hot Water
Operating Pressure
5bar
Connection Gender 1
Male
Pipe Size 1
1/2in
Operating Temperature Range
-10 → +99 °C
Country of Origin
Italy
Product details
Potable Water Shock Arrestor
Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better
Maximum temperature: 99ﾟC
Minimum temperature: -10ﾟC
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter
Approvals
WRAS Approved
Expansion Vessels
Stock information temporarily unavailable.
Please check again later.
€ 71.66
Each (Exc. VAT)
1
€ 71.66
Each (Exc. VAT)
1
Buy in bulk
| Quantity | Unit price |
|---|---|
| 1 - 9 | € 71.66 |
| 10 - 24 | € 68.80 |
| 25 - 49 | € 66.66 |
| 50+ | € 64.51 |
Technical Document
Specifications
Connection 1
1/2 in BSP Male
Body Material
Stainless Steel
For Use With
Cold Water, Hot Water
Operating Pressure
5bar
Connection Gender 1
Male
Pipe Size 1
1/2in
Operating Temperature Range
-10 → +99 °C
Country of Origin
Italy
Product details
Potable Water Shock Arrestor
Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better
Maximum temperature: 99ﾟC
Minimum temperature: -10ﾟC
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter
Approvals
WRAS Approved