Honeywell DTE6 Series Plunger Limit Switch, 2NO/2NC, IP66, DPDT, Die Cast Zinc Housing, 250V ac Max, 10A Max
Technical Document
Specifications
Brand
HoneywellActuator Type
Plunger
Pole and Throw Configuration
DPDT
Normal State Configuration
2NO/2NC
IP Rating
IP66
Maximum Current
10A
Housing Material
Die Cast Zinc
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
DTE6
Action Type
Snap Action
Length
77.22mm
Minimum Operating Temperature
-32°C
Depth
44.45mm
Width
25.4mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
Product details
DTE6 Medium Duty Limit Switches
The DTE6 limit switch series from Honeywell is designed for use within a medium duty environment. This range of industrial limit switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on the DTE6 side mountable switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
Side mount
Zinc die-cast housing
Stock information temporarily unavailable.
Please check again later.
€ 211.67
Each (Exc. VAT)
1
€ 211.67
Each (Exc. VAT)
1
Buy in bulk
| Quantity | Unit price |
|---|---|
| 1 - 4 | € 211.67 |
| 5 - 9 | € 203.20 |
| 10+ | € 192.62 |
Technical Document
Specifications
Brand
HoneywellActuator Type
Plunger
Pole and Throw Configuration
DPDT
Normal State Configuration
2NO/2NC
IP Rating
IP66
Maximum Current
10A
Housing Material
Die Cast Zinc
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
DTE6
Action Type
Snap Action
Length
77.22mm
Minimum Operating Temperature
-32°C
Depth
44.45mm
Width
25.4mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
Product details
DTE6 Medium Duty Limit Switches
The DTE6 limit switch series from Honeywell is designed for use within a medium duty environment. This range of industrial limit switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on the DTE6 side mountable switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
Side mount
Zinc die-cast housing