Tapa de botón pulsador, Color Negro, para uso con Interruptor táctil sellado de las series KSA y KSL
Documentos Técnicos
Especificaciones
Color de la Tapa
Black
Tipo de Accesorio
Button
Brand
C & KPara Utilizar Con
Interruptor táctil sellado de las series KSA y KSL
País de Origen
France
Datos del producto
Convertidor electrónico para MR16
Convertidor independiente. Aislamiento doble de clase II, IP40 para control de LED de alta potencia.
Para controlar de 1 a 10 LED de tipo MR16.
Protección con recuperación automática contra sobrecalentamiento, circuitos abiertos, cortocircuito en secundario.
Salida estabilizada: 24 V, 20 W.
Amplia gama de tensión de alimentación: 100 → 265 Vac.
Low Voltage Lighting Transformers
Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.
Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 0,47
Each (Sin IVA)
1
€ 0,47
Each (Sin IVA)
1
Comprar en grandes cantidades
| Cantidad | Precio Unitario sin IVA |
|---|---|
| 1 - 9 | € 0,47 |
| 10 - 49 | € 0,45 |
| 50 - 99 | € 0,42 |
| 100 - 499 | € 0,38 |
| 500+ | € 0,36 |
Documentos Técnicos
Especificaciones
Color de la Tapa
Black
Tipo de Accesorio
Button
Brand
C & KPara Utilizar Con
Interruptor táctil sellado de las series KSA y KSL
País de Origen
France
Datos del producto
Convertidor electrónico para MR16
Convertidor independiente. Aislamiento doble de clase II, IP40 para control de LED de alta potencia.
Para controlar de 1 a 10 LED de tipo MR16.
Protección con recuperación automática contra sobrecalentamiento, circuitos abiertos, cortocircuito en secundario.
Salida estabilizada: 24 V, 20 W.
Amplia gama de tensión de alimentación: 100 → 265 Vac.
Low Voltage Lighting Transformers
Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.
Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.