Hydraulic flare tube end sleeve,6mm OD

Código de producto RS: 302-8152Marca: ParkerNúmero de parte de fabricante: TXS6
brand-logo
Ver todo en Accesorios para Racores Hidráulicos

Documentos Técnicos

Especificaciones

Brand

Parker

Material

Steel

Datos del producto

Funda final

Adecuada para utilizarla con la gama completa de racores de tubo abocinados y tubos hidráulicos Triple-Lok.

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Información de stock no disponible temporalmente.

Vuelva a verificar más tarde.

Información de stock no disponible temporalmente.

P.O.A.

Hydraulic flare tube end sleeve,6mm OD

10

Disponible en múltiplos de 10
10P.O.A.
20P.O.A.
30P.O.A.
40P.O.A.
50P.O.A.
60P.O.A.
70P.O.A.
80P.O.A.
90P.O.A.
100P.O.A.
110P.O.A.
120P.O.A.
130P.O.A.
140P.O.A.
150P.O.A.

P.O.A.

Hydraulic flare tube end sleeve,6mm OD
Información de stock no disponible temporalmente.

10

Disponible en múltiplos de 10
10P.O.A.
20P.O.A.
30P.O.A.
40P.O.A.
50P.O.A.
60P.O.A.
70P.O.A.
80P.O.A.
90P.O.A.
100P.O.A.
110P.O.A.
120P.O.A.
130P.O.A.
140P.O.A.
150P.O.A.

Documentos Técnicos

Especificaciones

Brand

Parker

Material

Steel

Datos del producto

Funda final

Adecuada para utilizarla con la gama completa de racores de tubo abocinados y tubos hidráulicos Triple-Lok.

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.