Hydraulic flare tube end sleeve,12mm OD
Documentos Técnicos
Especificaciones
Brand
ParkerTipo de conexión hidráulica
Manguito de extremo hidráulico
Material
Steel
Acabado
Zinc Plated
Máxima Presión de Funcionamiento
350bar
Temperatura de Funcionamiento Mínima
-40°C
Máxima Temperatura de Funcionamiento
+120°C
Datos del producto
Funda final
Adecuada para utilizarla con la gama completa de racores de tubo abocinados y tubos hidráulicos Triple-Lok.
Flared Tube Fittings
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
10
P.O.A.
10
Documentos Técnicos
Especificaciones
Brand
ParkerTipo de conexión hidráulica
Manguito de extremo hidráulico
Material
Steel
Acabado
Zinc Plated
Máxima Presión de Funcionamiento
350bar
Temperatura de Funcionamiento Mínima
-40°C
Máxima Temperatura de Funcionamiento
+120°C
Datos del producto
Funda final
Adecuada para utilizarla con la gama completa de racores de tubo abocinados y tubos hidráulicos Triple-Lok.
Flared Tube Fittings
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.