Documentos Técnicos
Especificaciones
Brand
OsramTensión de Salida
38 → 120V
Potencia Máxima de Salida
45W
Output Current
100 mA, 700 mA
Input Voltage
195 → 264 V
Funcionamiento
Corriente constante
Tensión de Entrada AC o DC
AC
Índice de protección IP
IP20
Serie
OPTOTRONIC OT
Tensión nominal
195 → 264V
Datos del producto
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Rango de corriente de salida: 100 a 700 mA
Control del ajuste de corriente a través de interruptor DIP e interfaz LEDset
Interruptor muy bajo en corriente
Prueba futura y ajuste de corriente flexible
Eficiencia alta de forma consistente
Equivalente a SELV
Adecuado para aplicaciones interiores incluyendo paneles de iluminación OLED
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
OsramTensión de Salida
38 → 120V
Potencia Máxima de Salida
45W
Output Current
100 mA, 700 mA
Input Voltage
195 → 264 V
Funcionamiento
Corriente constante
Tensión de Entrada AC o DC
AC
Índice de protección IP
IP20
Serie
OPTOTRONIC OT
Tensión nominal
195 → 264V
Datos del producto
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Rango de corriente de salida: 100 a 700 mA
Control del ajuste de corriente a través de interruptor DIP e interfaz LEDset
Interruptor muy bajo en corriente
Prueba futura y ajuste de corriente flexible
Eficiencia alta de forma consistente
Equivalente a SELV
Adecuado para aplicaciones interiores incluyendo paneles de iluminación OLED