Documentos Técnicos
Especificaciones
Retroiluminación
Yes
Número de Puertos
6
Display Colour
Grey
Gama del Producto
Sysmac HMI
Temperatura de Funcionamiento Máxima
+70°C
Display Size
7"
Índice de protección IP
IP65
Temperatura Mínima de Operación
-20°C
Tipo de Display
LCD TFT
Tipo de Puerto
1 x Serial, 1 x USB Slave, 2 x Ethernet, 2 x USB Host
Voltaje de suministro
24 V dc
Profundidad
69mm
Profundidad
236mm
Longitud:
165mm
Brand
OmronCódigo parcial de rodamiento
51305
Dimensiones del Cuerpo
236 x 165 x 69 mm
País de Origen
Netherlands
Datos del producto
Calentadores de Cartucho de Inmersión
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Recubrimiento de acero inoxidable 316 Casquillo de montaje y junta final soldada Heliarc Aislamiento de óxido de magnesio Cables aislados con fibra de vidrio
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 2.201,49
Each (Sin IVA)
1
€ 2.201,49
Each (Sin IVA)
1
Documentos Técnicos
Especificaciones
Retroiluminación
Yes
Número de Puertos
6
Display Colour
Grey
Gama del Producto
Sysmac HMI
Temperatura de Funcionamiento Máxima
+70°C
Display Size
7"
Índice de protección IP
IP65
Temperatura Mínima de Operación
-20°C
Tipo de Display
LCD TFT
Tipo de Puerto
1 x Serial, 1 x USB Slave, 2 x Ethernet, 2 x USB Host
Voltaje de suministro
24 V dc
Profundidad
69mm
Profundidad
236mm
Longitud:
165mm
Brand
OmronCódigo parcial de rodamiento
51305
Dimensiones del Cuerpo
236 x 165 x 69 mm
País de Origen
Netherlands
Datos del producto
Calentadores de Cartucho de Inmersión
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Recubrimiento de acero inoxidable 316 Casquillo de montaje y junta final soldada Heliarc Aislamiento de óxido de magnesio Cables aislados con fibra de vidrio
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.