Conector XLR Hembra de 3 pines Neutrik, contactos de Bronce revestidos de Oro, Plata, 3A, Montaje de Cable
Documentos Técnicos
Especificaciones
Brand
NeutrikNúmero de Contactos
3
Género
Female
Tipo de montaje
Cable Mount
Orientación del Cuerpo
Straight
Revestimiento del Contacto
Gold, Silver
Material de la Carcasa
Nylon
Método de Terminación
IDT
Valor Nominal de Corriente
3A
Material de los Contactos
Bronze
País de Origen
Liechtenstein
Datos del producto
Conectores aéreos IDC XLR de la serie X
An ingenious connector that allows rapid termination of microphone cable without the need for lengthy cable preparation or soldering. Based on the insulation displacement contact (IDC) idea, the only stripping required is that of the cable’s outer sheath which is removed to the recommended length (18mm). Once the boot and chuck are slipped over the cable, the individual wires (with insulation) can be inserted into the contacts which are housed in the plastic insert. The keyed chuck is then slid over the insert forcing the contact tines to bite through the insulation. No assembly tools are needed.
Warning
Not to be used as mains connectors
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
NeutrikNúmero de Contactos
3
Género
Female
Tipo de montaje
Cable Mount
Orientación del Cuerpo
Straight
Revestimiento del Contacto
Gold, Silver
Material de la Carcasa
Nylon
Método de Terminación
IDT
Valor Nominal de Corriente
3A
Material de los Contactos
Bronze
País de Origen
Liechtenstein
Datos del producto
Conectores aéreos IDC XLR de la serie X
An ingenious connector that allows rapid termination of microphone cable without the need for lengthy cable preparation or soldering. Based on the insulation displacement contact (IDC) idea, the only stripping required is that of the cable’s outer sheath which is removed to the recommended length (18mm). Once the boot and chuck are slipped over the cable, the individual wires (with insulation) can be inserted into the contacts which are housed in the plastic insert. The keyed chuck is then slid over the insert forcing the contact tines to bite through the insulation. No assembly tools are needed.
Warning
Not to be used as mains connectors