Motor paso a paso, 1.8°, Bobinado Unipolar, tipo Híbrido, 8 Cables, Par 0.52Nm
Documentos Técnicos
Especificaciones
Shaft Diameter
6.35mm
Valor Nominal de Corriente
2 A
Ángulo de Inclinación
1.8°
País de Origen
Italy
Datos del producto
Motor híbrido tamaño 23
Bobinado de baja inductancia para una alta frecuencia de posicionamiento
Alta resolución: 200 pasos/rev. (400 pasos/rev.: 1/2 paso)
Configuración de 8 conexiones para accionadores monopolares de 4 fases o bipolares de 2 fases
Ideal para instrumentación de altas prestaciones, equipos de prueba y medida y manipulación de componentes
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Shaft Diameter
6.35mm
Valor Nominal de Corriente
2 A
Ángulo de Inclinación
1.8°
País de Origen
Italy
Datos del producto
Motor híbrido tamaño 23
Bobinado de baja inductancia para una alta frecuencia de posicionamiento
Alta resolución: 200 pasos/rev. (400 pasos/rev.: 1/2 paso)
Configuración de 8 conexiones para accionadores monopolares de 4 fases o bipolares de 2 fases
Ideal para instrumentación de altas prestaciones, equipos de prueba y medida y manipulación de componentes
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: