Válvula de bola, Legris, 0402 07 13, Latón 40bar 580psi
Documentos Técnicos
Especificaciones
Brand
LegrisTipo
2 Way
Material de la Bola
Brass
Tipo de Accesorio
Threaded
Rosca Estándar
BSPP
Tamaño de Rosca
1/4in
Material del Cuerpo
Brass
Seguro para Usar con
Water
Tipo de Tirador
Lever
Material del Tirador
Zinc Alloy
Presión máxima de funcionamiento psi
580psi
Maximum Working Pressure (psi)
580psi
Presión de Funcionamiento
40bar
Maximum Working Pressure bar
40bar
Maximum Working Pressure (bar)
40bar
País de Origen
France
Datos del producto
Quarter-turn Valve, Standard
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 28,19
Each (Sin IVA)
1
€ 28,19
Each (Sin IVA)
1
Comprar en grandes cantidades
| Cantidad | Precio Unitario sin IVA |
|---|---|
| 1 - 4 | € 28,19 |
| 5 - 9 | € 27,31 |
| 10+ | € 26,53 |
Documentos Técnicos
Especificaciones
Brand
LegrisTipo
2 Way
Material de la Bola
Brass
Tipo de Accesorio
Threaded
Rosca Estándar
BSPP
Tamaño de Rosca
1/4in
Material del Cuerpo
Brass
Seguro para Usar con
Water
Tipo de Tirador
Lever
Material del Tirador
Zinc Alloy
Presión máxima de funcionamiento psi
580psi
Maximum Working Pressure (psi)
580psi
Presión de Funcionamiento
40bar
Maximum Working Pressure bar
40bar
Maximum Working Pressure (bar)
40bar
País de Origen
France
Datos del producto
Quarter-turn Valve, Standard
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.