Adhesivo acrílico ITW Devcon Plastic Welder de color Blanco, Tubo de 25 ml, curado en 24h
Documentos Técnicos
Especificaciones
Brand
ITW DevconTipo de adhesivo
Adhesivo acrílico
Nombre comercial
Plastic Welder
Aplicación
Adhesivo
Compatibilidad del Material
ABS, epoxi, FRT, plástico reforzado con fibra de vidrio, GTX, Lomod, Metton, Minlon, Noryl, PBT, PCBB, PPO, PVC, uretano, madera
Color
White
Tipo de Acrílico
Ácido metracrílico
Forma del Producto
Adhesivo
Tipo de Paquete
Tube
Tamaño del Paquete
25 ml
Tiempo de Cura
24h
Fuerza de Corte
1.300 (ABS) psi, 1.400 (policarbonato) psi, 3.500 (GBS) psi
Medición de Viscosidad
55000cP/s
Temperatura Máxima de Operación
+250°F
Rango de temperaturas de funcionamiento
-67 → +250 °F
Temperatura de Funcionamiento Mínima
-67°F
Datos del producto
Plastic Welder
Superior strength
Toughened adhesive for high strength, load bearing bonds
Bonds engineered plastics, metals, composites, ceramics and dissimilar substrates
Limited surface preparation is required
Excellent environmental resistance
Working time is 4-6mins, fixture time is 12-15minutes
Approved under UL 746C Polymeric Adhesive systems, Electrical Equipment component
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
ITW DevconTipo de adhesivo
Adhesivo acrílico
Nombre comercial
Plastic Welder
Aplicación
Adhesivo
Compatibilidad del Material
ABS, epoxi, FRT, plástico reforzado con fibra de vidrio, GTX, Lomod, Metton, Minlon, Noryl, PBT, PCBB, PPO, PVC, uretano, madera
Color
White
Tipo de Acrílico
Ácido metracrílico
Forma del Producto
Adhesivo
Tipo de Paquete
Tube
Tamaño del Paquete
25 ml
Tiempo de Cura
24h
Fuerza de Corte
1.300 (ABS) psi, 1.400 (policarbonato) psi, 3.500 (GBS) psi
Medición de Viscosidad
55000cP/s
Temperatura Máxima de Operación
+250°F
Rango de temperaturas de funcionamiento
-67 → +250 °F
Temperatura de Funcionamiento Mínima
-67°F
Datos del producto
Plastic Welder
Superior strength
Toughened adhesive for high strength, load bearing bonds
Bonds engineered plastics, metals, composites, ceramics and dissimilar substrates
Limited surface preparation is required
Excellent environmental resistance
Working time is 4-6mins, fixture time is 12-15minutes
Approved under UL 746C Polymeric Adhesive systems, Electrical Equipment component
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.