Tapa antipolvo ITT Cannon macho de Polímero, tamaño 16, IP67
Documentos Técnicos
Especificaciones
Brand
ITT CannonGénero
Male
Tamaño de la Funda
16
Índice de protección IP
IP67
Racores de Montaje en Panel
Yes
Material
Polymer
Color
Grey
Datos del producto
Tapas anti-polvo
Tapas antipolvo de plástico para carcasas de conector macho y conector hembra de montaje en panel. Solo es necesario conocer el tamaño de la carcasa para determinar la tapa correcta. Las tapas incluyen una correa de sujeción de plástico.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 6,183
Cada Uno (En una Bolsa de 100) (Sin IVA)
100
€ 6,183
Cada Uno (En una Bolsa de 100) (Sin IVA)
100
Documentos Técnicos
Especificaciones
Brand
ITT CannonGénero
Male
Tamaño de la Funda
16
Índice de protección IP
IP67
Racores de Montaje en Panel
Yes
Material
Polymer
Color
Grey
Datos del producto
Tapas anti-polvo
Tapas antipolvo de plástico para carcasas de conector macho y conector hembra de montaje en panel. Solo es necesario conocer el tamaño de la carcasa para determinar la tapa correcta. Las tapas incluyen una correa de sujeción de plástico.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.