Documentos Técnicos
Especificaciones
Brand
EMERSON – ASCOVoltaje de suministro
24 V dc
Para Utilizar Con
Solenoid valve
Serie
552/553
País de Origen
France
Datos del producto
Bobinas CM25 para válvulas solenoides serie 107
Bobinas CM25 para válvulas solenoides serie 107.
Cabezales magnéticos.
Conexión de cable con conexión a tierra.
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 28,01
Each (Sin IVA)
1
€ 28,01
Each (Sin IVA)
1
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA |
---|---|
1 - 4 | € 28,01 |
5 - 9 | € 27,23 |
10+ | € 26,49 |
Documentos Técnicos
Especificaciones
Brand
EMERSON – ASCOVoltaje de suministro
24 V dc
Para Utilizar Con
Solenoid valve
Serie
552/553
País de Origen
France
Datos del producto
Bobinas CM25 para válvulas solenoides serie 107
Bobinas CM25 para válvulas solenoides serie 107.
Cabezales magnéticos.
Conexión de cable con conexión a tierra.
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.