Square 2NO momentary audio switch
Documentos Técnicos
Especificaciones
Brand
EAOIluminado
Yes
Configuración de los Contactos
Single Pole Double Throw (SPDT)
Tamaño de la Abertura del Panel
16 (Dia.)mm
Diámetro de la Abertura del Panel
16mm
Índice de protección IP
IP40
Valor Nominal del Contacto
100 mA a 42 V
Actuator Shape
Rectangular
Tipo terminal
Through Hole
Tipo de Montaje
PCB
Tipo de actuador
Button
País de Origen
Switzerland
Datos del producto
Interruptor de botón pulsador iluminado - Serie 31 EAO
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Disponibilidad de varias configuraciones incluyendo elementos de bajo nivel o de acción de inserción, acciones de conmutación momentánea o por enclavamiento y contactos normalmente cerrados o normalmente abiertos
Perfil de botón elevado
Interruptor autextinguible y material de la carcasa del actuador
Conforma a clase II
Resistencia eléctrica 2.500 Vac 50 Hz para un minuto entre todos los terminales a tierra, conforme a IEC 60512-2-11
Standards
EN 61058
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 41,82
Each (Sin IVA)
1
€ 41,82
Each (Sin IVA)
1
Comprar en grandes cantidades
| Cantidad | Precio Unitario sin IVA |
|---|---|
| 1 - 9 | € 41,82 |
| 10+ | € 40,24 |
Documentos Técnicos
Especificaciones
Brand
EAOIluminado
Yes
Configuración de los Contactos
Single Pole Double Throw (SPDT)
Tamaño de la Abertura del Panel
16 (Dia.)mm
Diámetro de la Abertura del Panel
16mm
Índice de protección IP
IP40
Valor Nominal del Contacto
100 mA a 42 V
Actuator Shape
Rectangular
Tipo terminal
Through Hole
Tipo de Montaje
PCB
Tipo de actuador
Button
País de Origen
Switzerland
Datos del producto
Interruptor de botón pulsador iluminado - Serie 31 EAO
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Disponibilidad de varias configuraciones incluyendo elementos de bajo nivel o de acción de inserción, acciones de conmutación momentánea o por enclavamiento y contactos normalmente cerrados o normalmente abiertos
Perfil de botón elevado
Interruptor autextinguible y material de la carcasa del actuador
Conforma a clase II
Resistencia eléctrica 2.500 Vac 50 Hz para un minuto entre todos los terminales a tierra, conforme a IEC 60512-2-11
Standards
EN 61058