Pulsador Bartec ComEx, SPST, Montaje en Panel, IP67, iluminado
Documentos Técnicos
Especificaciones
Brand
BartecIluminado
Yes
Diámetro de la Abertura del Panel
30.5mm
Tipo de montaje
Panel Mount
Configuración de los Contactos
SPST-NA
Índice de protección IP
IP67
Serie
ComEx
Referencia de fabricante
07-3363-3823/2000
Tipo de Terminal
Wire Lead
Tensión AC Máxima
230V
Tensión DC Máxima
24V
Temperatura Mínima de Funcionamiento
-40°C
Certificación para atmósferas explosivas ATEX
ATEX
Máxima Temperatura de Funcionamiento
+50°C
País de Origen
Germany
Datos del producto
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Momentary, snap-action switch
Very bright LED, visible over 180°
Protected to IP66/67
Temperature range -55 to +50°C
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
BartecIluminado
Yes
Diámetro de la Abertura del Panel
30.5mm
Tipo de montaje
Panel Mount
Configuración de los Contactos
SPST-NA
Índice de protección IP
IP67
Serie
ComEx
Referencia de fabricante
07-3363-3823/2000
Tipo de Terminal
Wire Lead
Tensión AC Máxima
230V
Tensión DC Máxima
24V
Temperatura Mínima de Funcionamiento
-40°C
Certificación para atmósferas explosivas ATEX
ATEX
Máxima Temperatura de Funcionamiento
+50°C
País de Origen
Germany
Datos del producto
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Momentary, snap-action switch
Very bright LED, visible over 180°
Protected to IP66/67
Temperature range -55 to +50°C
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.