Documentos Técnicos
Especificaciones
Género
Female
Número de Filas
1
Orientación
Straight
Número de Contactos
2
Color
Black
Material del Contacto
Beryllium Copper
Profundidad
2.54mm
Profundidad
6.35mm
Paso
5.08mm
Revestimiento del Contacto
Tin over Nickel
Longitud:
7.62mm
Tipo
Open Top
Brand
TE ConnectivitySerie
AMPMODU
País de Origen
United States
Datos del producto
PCB Mount (Pin)
Completados con contactos macho girados, estos conectores se montarán directamente en PCB. El paso entre los pines tiene un espacio de 0,2 in . Cierre con carcasa aérea tipo A
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 0,53
Each (In a Box of 2000) (Sin IVA)
2000
€ 0,53
Each (In a Box of 2000) (Sin IVA)
2000
Documentos Técnicos
Especificaciones
Género
Female
Número de Filas
1
Orientación
Straight
Número de Contactos
2
Color
Black
Material del Contacto
Beryllium Copper
Profundidad
2.54mm
Profundidad
6.35mm
Paso
5.08mm
Revestimiento del Contacto
Tin over Nickel
Longitud:
7.62mm
Tipo
Open Top
Brand
TE ConnectivitySerie
AMPMODU
País de Origen
United States
Datos del producto
PCB Mount (Pin)
Completados con contactos macho girados, estos conectores se montarán directamente en PCB. El paso entre los pines tiene un espacio de 0,2 in . Cierre con carcasa aérea tipo A
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)