Polyamide high temp electric glue gun

Código de producto RS: 514-6202Marca: Power AdhesivesNúmero de parte de fabricante: TEC650HT
Ver todo en Pistolas de Pegamento

Documentos Técnicos

Especificaciones

Brand

Power Adhesives

Datos del producto

Polyamide Hot Melt Glue Gun

A high temperature Hot Melt glue gun that has been developed especially to use with our range of 12mm diameter Polyamide Hot Melt adhesive sticks.Typical uses include: potting and encapsulating, reinforcing cables on PCBs, TV yoke assembly and many more applications where high and low temperature resistances are required.

High temperature operation of up to 215°C
Fast warm-up time of 4-5 minutes
Silicone rubber nozzle shroud for extra safety
High output of up to 1.6 Kg/Hr of molten hot melt
Easy to use and control full hand lever trigger
Power-on warning light
Use with any polyamide glue sticks type 5 and 6 as shown on the ’Glue for Glue Guns’ charts

Supplied with

MSDS

Warning

Hot melt adhesive may reach temperatures in excess of 210°C

Te podría interesar

Información de stock no disponible temporalmente.

Vuelva a verificar más tarde.

Información de stock no disponible temporalmente.

P.O.A.

Polyamide high temp electric glue gun

1

Disponible en múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

Polyamide high temp electric glue gun
Información de stock no disponible temporalmente.

1

Disponible en múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
Te podría interesar

Documentos Técnicos

Especificaciones

Brand

Power Adhesives

Datos del producto

Polyamide Hot Melt Glue Gun

A high temperature Hot Melt glue gun that has been developed especially to use with our range of 12mm diameter Polyamide Hot Melt adhesive sticks.Typical uses include: potting and encapsulating, reinforcing cables on PCBs, TV yoke assembly and many more applications where high and low temperature resistances are required.

High temperature operation of up to 215°C
Fast warm-up time of 4-5 minutes
Silicone rubber nozzle shroud for extra safety
High output of up to 1.6 Kg/Hr of molten hot melt
Easy to use and control full hand lever trigger
Power-on warning light
Use with any polyamide glue sticks type 5 and 6 as shown on the ’Glue for Glue Guns’ charts

Supplied with

MSDS

Warning

Hot melt adhesive may reach temperatures in excess of 210°C

Te podría interesar