Herramienta abocinada Parker, diám. ext. 10mm
Documentos Técnicos
Especificaciones
Brand
ParkerTipo
Bloque de mordazas
Datos del producto
Bloque de torno
Las herramientas de abocinado manual se utilizan para producir el abocinado de 37° necesario en el extremo del tubo hidráulico y garantizar una única junta eficaz entre la punta del racor de tubo abocinado Triple-Lok y el tubo. Estas herramientas se usan en tornos de taller estándar y el abocinado se realiza sujetando el tubo a ras de las mitades del bloque y golpeando con el martillo el vástago abocinado. Para cada tamaño de tubo se utiliza un conjunto diferente de bloque y vástago.
Flared Tube Fittings
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
ParkerTipo
Bloque de mordazas
Datos del producto
Bloque de torno
Las herramientas de abocinado manual se utilizan para producir el abocinado de 37° necesario en el extremo del tubo hidráulico y garantizar una única junta eficaz entre la punta del racor de tubo abocinado Triple-Lok y el tubo. Estas herramientas se usan en tornos de taller estándar y el abocinado se realiza sujetando el tubo a ras de las mitades del bloque y golpeando con el martillo el vástago abocinado. Para cada tamaño de tubo se utiliza un conjunto diferente de bloque y vástago.
Flared Tube Fittings
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.