Funda para conector Trident ITT Cannon Trident Neptune, , de Plástico Negro
Documentos Técnicos
Especificaciones
Brand
ITT CannonTipo
Conector Trident
Forrado con Adhesivo
No
Material
Plastic
Color
Black
Cumple con los Estándares
UL 94V-0
Serie
Trident Neptune
País de Origen
Hungary
Datos del producto
Carcasa posterior
Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
€ 3,57
Each (Sin IVA)
1
€ 3,57
Each (Sin IVA)
1
Documentos Técnicos
Especificaciones
Brand
ITT CannonTipo
Conector Trident
Forrado con Adhesivo
No
Material
Plastic
Color
Black
Cumple con los Estándares
UL 94V-0
Serie
Trident Neptune
País de Origen
Hungary
Datos del producto
Carcasa posterior
Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.