Válvula de solenoide Burkert 6014 de 3 puertos, Hembra G de 1/4 pulg., Directo, NC de 230 Vac

Válvula solenoide de uso general 6014

Válvulas solenoides normalmente cerradas con cuerpo de latón

Coil fácilmente cambiado con la válvula en su lugar
Dos puertos hembra y un puerto de ventilación macho de 1/8 pulg
La coil se puede bloquear en cuatro posiciones de 90° o moverse libremente entre ellas, según sea necesario
Cuerpo de latón y material de sellado de alta calidad FKM
Bobina encapsulada de epoxi
Rango de temperatura del líquido: -10 a +90 °C.
Adecuado para usar con agua, líquidos neutros aire natural, gases, aceite y grasas (sin aditivos)
Viscosidad máxima: 21mm ² /s.
Temperatura de funcionamiento: –10 a +100 °C máx.
Consumo de energía: 21VA (ac en pico), 12VA/8W (constante) 8W (dc)
Protección IP65 con conector macho aéreo DIN43650C

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.