Carcasa de conector circular ITT Cannon TNA24CA01-25L / 192900-0185
Documentos Técnicos
Especificaciones
Datos del producto
Carcasa posterior
Disponible en versiones termorretráctiles o roscadas para el uso con conducto flexible de plástico. Se puede instalar en el lugar de la tuerca de fijación de la junta en los respectivos conectores macho y hembra.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 10,67
€ 10,67 Each (Sin IVA)
1
€ 10,67
€ 10,67 Each (Sin IVA)
1
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
| Cantidad | Precio Unitario sin IVA |
|---|---|
| 1 - 19 | € 10,67 |
| 20 - 39 | € 9,62 |
| 40+ | € 8,64 |
Documentos Técnicos
Especificaciones
Datos del producto
Carcasa posterior
Disponible en versiones termorretráctiles o roscadas para el uso con conducto flexible de plástico. Se puede instalar en el lugar de la tuerca de fijación de la junta en los respectivos conectores macho y hembra.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.