Unidad supresora de transitorios Entrelec, Bloque Terminal, 130 Vdc, 2.5kA, Carril DIN
Documentos Técnicos
Especificaciones
Brand
EntrelecTipo de Supresor
Bloque Terminal con Supresor de Tensión Transitoria
Máxima Tensión Nominal
130 V dc
Tipo de montaje
DIN Rail
Máxima Corriente de Punta
2.5kA
Series
M 4/9 PV
Longitud:
65.5mm
Profundidad
64.5mm
Mínima Temperatura de Funcionamiento
-55°C
Temperatura Máxima de Funcionamiento
+130°C
Datos del producto
Bloque Terminal Con Protección Contra
Moldura de poliamida 6.6 de nylon gris
Tornillos de terminal cautivos con cabezales endurecidos
Tamaño de separación compacto 9mm
Montaje en carril tipo G o perfil Top profundo
Categoría de ubicación Zona 2
Dimensiones: 65,5 x 67mm
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
€ 10,37
€ 10,37 Each (Sin IVA)
1
€ 10,37
€ 10,37 Each (Sin IVA)
1
Información de stock no disponible temporalmente.
Vuelva a verificar más tarde.
Documentos Técnicos
Especificaciones
Brand
EntrelecTipo de Supresor
Bloque Terminal con Supresor de Tensión Transitoria
Máxima Tensión Nominal
130 V dc
Tipo de montaje
DIN Rail
Máxima Corriente de Punta
2.5kA
Series
M 4/9 PV
Longitud:
65.5mm
Profundidad
64.5mm
Mínima Temperatura de Funcionamiento
-55°C
Temperatura Máxima de Funcionamiento
+130°C
Datos del producto
Bloque Terminal Con Protección Contra
Moldura de poliamida 6.6 de nylon gris
Tornillos de terminal cautivos con cabezales endurecidos
Tamaño de separación compacto 9mm
Montaje en carril tipo G o perfil Top profundo
Categoría de ubicación Zona 2
Dimensiones: 65,5 x 67mm
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.