X9C103PZ, Digital Potentiometer 10kΩ 100-Position Linear Serial-3 Wire 8 Pin, PDIP
Technical Document
Specifications
Taper Type
Linear
Number of Pots per Package
1
Memory Type
Non-Volatile
Resistance Value
10kΩ
Number of Positions
100
Control Interface
Serial-3 Wire
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Through Hole
Height
3.3mm
Width
6.35mm
Length
9.56mm
Typical Single Supply Voltage
5 V
Package Type
PDIP
Brand
Renesas ElectronicsDimensions
9.56 x 6.35 x 3.3mm
Country of Origin
Thailand
Product details
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stock information temporarily unavailable.
Please check again later.
€ 6.542
Each (In a Pack of 2) (Exc. Vat)
Standard
2
€ 6.542
Each (In a Pack of 2) (Exc. Vat)
Standard
2
Buy in bulk
| Quantity | Unit price | Per Pack |
|---|---|---|
| 2 - 8 | € 6.542 | € 13.08 |
| 10 - 38 | € 5.586 | € 11.17 |
| 40 - 98 | € 5.292 | € 10.58 |
| 100 - 198 | € 4.811 | € 9.62 |
| 200+ | € 4.583 | € 9.16 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Technical Document
Specifications
Taper Type
Linear
Number of Pots per Package
1
Memory Type
Non-Volatile
Resistance Value
10kΩ
Number of Positions
100
Control Interface
Serial-3 Wire
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Through Hole
Height
3.3mm
Width
6.35mm
Length
9.56mm
Typical Single Supply Voltage
5 V
Package Type
PDIP
Brand
Renesas ElectronicsDimensions
9.56 x 6.35 x 3.3mm
Country of Origin
Thailand
Product details
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products