Gossen Metrawatt PROFITEST 2 Electrical Tester, 100 V, 250 V, 500 V , Earth Resistance Measurement
Technical Document
Specifications
Brand
Gossen MetrawattAutomatic RCD Test
Yes
Model Number p
PROFITEST 2
RCD Ramp Test
Yes
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V
Maximum Voltage Measurement
550V
Test Type
Continuity
Earth Resistance Measurement
Yes
Continuity Test Current
200mA
RCD Test Type
AC Type/DC Selective
Test Standards
DIN EN 60529, VDE 0470-1
IP Rating
IP40
Power Source
Battery
Width
240mm
Length
340mm
Safety Category
CAT III 500 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+50°C
Height
60mm
Dimensions
340 x 240 x 62mm
Minimum Continuity Resistance
0.01Ω
Minimum Operating Temperature
-10°C
Weight
2.5kg
Safety Category Level
CAT III, CAT IV
Plug Type
Type F - Schuko plug
Maximum Continuity Resistance
99.9Ω
Safety Category Voltage
300 V, 500 V
Battery Type
AA
Country of Origin
Germany
Product details
VDE 0100 testing device, Profitest 2
Testing of Residual-Current Protective Devices (RCCBs)
Special Testing for Systems and RCCBs
Testing of Special RCCBs Selective, type G
Testing of RCD Protection in IT Systems
Insulation Resistance Measurement with Nominal Voltage and Variable or Rising Test Voltage
Low-Resistance Measurements
Display of allowable fuse types for electrical systems
Start-up testing for energy consumption meters
Calculation of cable lengths for common copper conductor cross-sections
Measurement of biasing, leakage and circulating current up to 1 A, as well as working current to 150 A with the Clip 0100S accessory clip-on current sensor
Phase sequence measurement (phase sequence, highest line-to-line voltage)
Supplied with
PROFITEST 2 test instrument, insert for earthing contact plug (PRO-Schuko), two-pole measuring adapter, cable for expansion to three-pole adapter, 2x alligator clips, carrying strap, set batteries, operating instructions, factory calibration certificate
Stock information temporarily unavailable.
Please check again later.
Price on asking
1
Price on asking
1
Technical Document
Specifications
Brand
Gossen MetrawattAutomatic RCD Test
Yes
Model Number p
PROFITEST 2
RCD Ramp Test
Yes
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V
Maximum Voltage Measurement
550V
Test Type
Continuity
Earth Resistance Measurement
Yes
Continuity Test Current
200mA
RCD Test Type
AC Type/DC Selective
Test Standards
DIN EN 60529, VDE 0470-1
IP Rating
IP40
Power Source
Battery
Width
240mm
Length
340mm
Safety Category
CAT III 500 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+50°C
Height
60mm
Dimensions
340 x 240 x 62mm
Minimum Continuity Resistance
0.01Ω
Minimum Operating Temperature
-10°C
Weight
2.5kg
Safety Category Level
CAT III, CAT IV
Plug Type
Type F - Schuko plug
Maximum Continuity Resistance
99.9Ω
Safety Category Voltage
300 V, 500 V
Battery Type
AA
Country of Origin
Germany
Product details
VDE 0100 testing device, Profitest 2
Testing of Residual-Current Protective Devices (RCCBs)
Special Testing for Systems and RCCBs
Testing of Special RCCBs Selective, type G
Testing of RCD Protection in IT Systems
Insulation Resistance Measurement with Nominal Voltage and Variable or Rising Test Voltage
Low-Resistance Measurements
Display of allowable fuse types for electrical systems
Start-up testing for energy consumption meters
Calculation of cable lengths for common copper conductor cross-sections
Measurement of biasing, leakage and circulating current up to 1 A, as well as working current to 150 A with the Clip 0100S accessory clip-on current sensor
Phase sequence measurement (phase sequence, highest line-to-line voltage)
Supplied with
PROFITEST 2 test instrument, insert for earthing contact plug (PRO-Schuko), two-pole measuring adapter, cable for expansion to three-pole adapter, 2x alligator clips, carrying strap, set batteries, operating instructions, factory calibration certificate