Flowline EchoSwitch Series Ultrasonic Level Switch Ultrasonic Level Sensor, Vertical, PC Body
Technical Document
Specifications
Brand
FlowlineDevice Type
Ultrasonic Level Switch
Mounting Type
Vertical
Body Material
PC
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+71°C
Maximum ac Voltage
250V
Maximum Current
20 mA
Maximum Pressure
2bar
Gasket Material
FKM
Series
EchoSwitch
Current Rating
2 A
Country of Origin
United States
Product details
EchoSwitch LU77/74 Ultrasonic Level Switch
A general purpose ultrasonic level sensor with an integrated level controller. The unit is equipped with 3 programmable relays and a 4 to 20 mA output and is easy to program using the built-in push button display module. The relays can be set to a single set point or latched on two set points enabling simplex, duplex or triplex control modes. Each control mode features an adjustable time delay and fail safe logic.
Features and Benefits
NEMEA 4X polymer enclosure suitable for corrosive liquids
Three programmable relays
4-20 mA output signal
Narrow 2-3 inch beam width
4 or 8 inch dead-band (model dependant)
Automatic temperature compensation
Easy to setup using push button display module
Available with a 3 m or 5.5 m measuring range
Applications
The EchoSwitch LU74 and LU77 are suitable for various installations including corrosive, sticky or dirty liquids and ump lit stations, sump and day tank applications.
Stock information temporarily unavailable.
Please check again later.
€ 651.26
Each (Exc. VAT)
1
€ 651.26
Each (Exc. VAT)
1
Technical Document
Specifications
Brand
FlowlineDevice Type
Ultrasonic Level Switch
Mounting Type
Vertical
Body Material
PC
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+71°C
Maximum ac Voltage
250V
Maximum Current
20 mA
Maximum Pressure
2bar
Gasket Material
FKM
Series
EchoSwitch
Current Rating
2 A
Country of Origin
United States
Product details
EchoSwitch LU77/74 Ultrasonic Level Switch
A general purpose ultrasonic level sensor with an integrated level controller. The unit is equipped with 3 programmable relays and a 4 to 20 mA output and is easy to program using the built-in push button display module. The relays can be set to a single set point or latched on two set points enabling simplex, duplex or triplex control modes. Each control mode features an adjustable time delay and fail safe logic.
Features and Benefits
NEMEA 4X polymer enclosure suitable for corrosive liquids
Three programmable relays
4-20 mA output signal
Narrow 2-3 inch beam width
4 or 8 inch dead-band (model dependant)
Automatic temperature compensation
Easy to setup using push button display module
Available with a 3 m or 5.5 m measuring range
Applications
The EchoSwitch LU74 and LU77 are suitable for various installations including corrosive, sticky or dirty liquids and ump lit stations, sump and day tank applications.