Technical Document
Specifications
Illuminated
Yes
Actuator Shape
Round
Contact Resistance
20mΩ
Accessory Type
Kabel CANopen
Maximum Operating Temperature
+85°C
Mounting Type
Panel Mount
Actuator Colour
Green
Minimum Operating Temperature
-20°C
Contact Configuration
DPST
Terminal Type
Solder
Panel Cut Out Diameter
20mm
Switch Operation
On-Off
Operating Temperature Range
-20 → +85°C
Case Material
Nylon 66
Mechanical Life
10000Operations
Brand
ApemContact Current Rating
12 A
Panel Cut Out Size
20 (Dia.)mm
Contact Material
Silver Cadmium Alloy (Stationary); Phosphor Bronze (Movable)
Country of Origin
China
Product details
Flux gel, Kolopaste No.8
Colophony flux gel for SMD soldering repairs
Extremely low activation: flux residue has good insulating properties
For iron and bar soldering, plus hot air and IR procedures
Suitable for large-surface soldering of copper, brass and pre-tinned parts
Suitable for dispenser application, viscosity 10 mg / s
Solid content 55%
Standards
DIN EN 29454, type 1.1.3.C
Syringe/ Dispenser/ Bottles
Stock information temporarily unavailable.
Please check again later.
€ 4.79
Each (Exc. Vat)
1
€ 4.79
Each (Exc. Vat)
1
Buy in bulk
Quantity | Unit price |
---|---|
1 - 49 | € 4.79 |
50 - 99 | € 4.58 |
100 - 249 | € 4.40 |
250 - 499 | € 4.21 |
500+ | € 4.05 |
Technical Document
Specifications
Illuminated
Yes
Actuator Shape
Round
Contact Resistance
20mΩ
Accessory Type
Kabel CANopen
Maximum Operating Temperature
+85°C
Mounting Type
Panel Mount
Actuator Colour
Green
Minimum Operating Temperature
-20°C
Contact Configuration
DPST
Terminal Type
Solder
Panel Cut Out Diameter
20mm
Switch Operation
On-Off
Operating Temperature Range
-20 → +85°C
Case Material
Nylon 66
Mechanical Life
10000Operations
Brand
ApemContact Current Rating
12 A
Panel Cut Out Size
20 (Dia.)mm
Contact Material
Silver Cadmium Alloy (Stationary); Phosphor Bronze (Movable)
Country of Origin
China
Product details
Flux gel, Kolopaste No.8
Colophony flux gel for SMD soldering repairs
Extremely low activation: flux residue has good insulating properties
For iron and bar soldering, plus hot air and IR procedures
Suitable for large-surface soldering of copper, brass and pre-tinned parts
Suitable for dispenser application, viscosity 10 mg / s
Solid content 55%
Standards
DIN EN 29454, type 1.1.3.C