ifm electronic Inductive Barrel-Style Proximity Sensor, M30 x 1.5, 10 mm Detection, PNP Output, 10 → 36 V dc,
Technical Document
Specifications
Brand
ifm electronicSensor Technology
Inductive
Thread Size
M30 x 1.5
Body Style
Barrel
Output Type
PNP
Detection Range
10 mm
Terminal Type
Cable
IP Rating
IP65, IP67
Supply Voltage
10 → 36 V dc
Length
80mm
Maximum dc Voltage
36V
Mounting Type
Flush
Switching Current
250 mA
Housing Material
Polyamide, TPE-U
Maximum Operating Temperature
+80°C
Short Circuit Overload Protection
Yes
Minimum Operating Temperature
-25°C
Reverse Polarity Protection
Yes
Standards Met
EU, MTTFd Certificate
Country of Origin
Germany
Product details
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.
Stock information temporarily unavailable.
Please check again later.
€ 174.45
Each (Exc. Vat)
1
€ 174.45
Each (Exc. Vat)
1
Technical Document
Specifications
Brand
ifm electronicSensor Technology
Inductive
Thread Size
M30 x 1.5
Body Style
Barrel
Output Type
PNP
Detection Range
10 mm
Terminal Type
Cable
IP Rating
IP65, IP67
Supply Voltage
10 → 36 V dc
Length
80mm
Maximum dc Voltage
36V
Mounting Type
Flush
Switching Current
250 mA
Housing Material
Polyamide, TPE-U
Maximum Operating Temperature
+80°C
Short Circuit Overload Protection
Yes
Minimum Operating Temperature
-25°C
Reverse Polarity Protection
Yes
Standards Met
EU, MTTFd Certificate
Country of Origin
Germany
Product details
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.