Georg Fischer 63mm Outside Diameter PP Black Munsen Ring, 0.98in x 3.54in x 2.52in, 0.35in
Image representative of range only
Each (In a Pack of 2)
Please log in to see the latest prices
Production packaging offer
Also available in standard packaging
- Supplied in industry standard packaging
- For automated insertion in the production environment
- Flexible order quantities, order in multiples of 2
- Each (In a Pack of 2)
In stock in the UK.
(Order in multiples of 2)
RS Stock No.
Mfr Part No.
Still not found what you are looking for?
Not found what you are looking for? You can find products which may be more suitable
by simply checking the features that interest you above and clicking the Find button.
KLIP-IT Pipe Support System
For imperial and metric pipe systems
Black polyethylene clips
Black UV resistant polypropylene spacers
Clips can be mounted with or without spacers to give required height
Spacers and clips are connected by simple push fit
Clips 1 1/4 ", 1 1/2 ", 2", 40mm, 50mm and 63mm are fitted with a safety clip
PVC-U Piping System
PVC fittings must withstand the location-variable load conditions arising from the internal pressure. They must be reinforced where high loads occur. The wall thickness must be designed accordingly where low loads occur.
To verify the direction, the most common fittings must be labelled with an angle mark. The main dimensions must comply with ISO standards and ISO draft standards for mm pipe as well as DIN 8063. When making glued joints, use of an adhesive with gap-filling properties is absolutely essential.
Pipe, fittings, ball valves, diaphragm valves, ball check valves and accessories for creating PVC-U piping systems. The individual components are connected using the Tangit system comprising cleaner and adhesive.
Drinking water, distilled water, industrial water, wastewater, cooling brines, seawater, plant and apparatus engineering, food industry, beverage industry
Universally applicable plastic with the largest assortment of fittings and valves
Polyvinyl chloride without plasticiser
Not recommended for:
Low-temperature applications (<0 °C)
High-temperature applications (>60 °C)
GF PVC-U fittings feature the DIBt test mark (Deutsches Institut für Bautechnik / German Institute for Construction Engineering) no. Z-40.23-2.
Verification of suitability in accordance with § 19h of the German Federal Water Act (WHG) does not apply to these items.
|Test requirement ||Test principle ||External monitoring|
|Raw material || || |
|Density ||DIN 53479, ISO 4439 || |
|Bulk density ||DIN 53468 || |
|k-value ||DIN 53726 || |
|Oversize material ||DIN 53195, DIN 53734 || |
|Fittings || || |
|Vicat || || |
|softening temp. ||ISO 53460, DIN 2507 || |
|Surface ||DIN 8063//5 || |
|Quality requirement ||DIN 8063//5 ||BSI|
|Burst pressure, || || |
|Crush test ||Georg Fischer Standard, UNI ||NF|
|Heat storage ||DIN 8063//5, NFT 54-029 / 036, ||IIP|
| ||BS 4346-1, UNI 7449-75, ISO 580 ||KIWA|
|Creep depending on time under internal pressure ||DIN 8063//5, NFT 54-029 / 035, || |
| ||BSI 4346-1, UNI 7449-75, || |
| ||ISO TC 138 || |
|Valves || || |
|Surface ||DIN 3441//1 || |
|Masses, dimensions ||DIN 3441/2ff || |
|Density, function ||DIN 3441//1, DIN 3230//3 || |
|Heat storage ||DIN 3441//1 || |
|Creep depending on time under internal pressure ||DIN 3441//1 || |
|Bulk density ||1.38g / cm3|
|Tensile strength ||55 N / mm2|
|Elongation at break ||>30%|
|Impact strength ||No failure KJ / m2 (23°)|
|Module of elasticity ||3000 N / mm2|
|Thermal expansion coefficient ||0.08 mm / m°C|
|max. Operating temperature ||60 °C|
|Vicat softening temperature ||>76 °C (VST/B 50)|
|Moisture absorption ||<4 mg / cm3|
|Surface resistance ||approx. 1013 Ω|